Turbo Grinder of Calcium Carbonate

People currently use in daily life are also more than Calcium Carbonate, which is a large size of solid feedstock to standard size, usually smashed into micrometer level, usually our equipment is With multiple devices, it is usually composed of coarse, fine powder, or a wind device or the like. The main purpose is to use wind energy to be powdered, and have canceled the traditional screening at the time of use. The main application is more useful in many industries such as mining or building materials. Some industries such as metallurgical or building materials, chemicals, etc. are useful to use large crushers for work.

What factors affect the performance parameters used by Turbo Grinder of Calcium Carbonate?

The following is a detailed description:

1. Feeding particle size control

Most Turbo Grinder of Calcium Carbonate has a certain upper limit requirement for feed particle size. After entering the pulverization cavity, it can be sufficiently accelerated before collision and crushing with other particles. It is difficult to completely accelerate after large particles enter the pulverized cavity, which will allow them to stay in the machine too long, resulting in too high energy consumption. Therefore, in large-scale production of ultrafine powder, it is an effective way to pre-ground the raw material of the particle size is an effective pathway for energy saving.
2. Working medium

Currently, the working medium of Turbo Grinder of Calcium Carbonate is mainly compressed air, overheating steam, inert gas, and the like. The choice of working fluid has a certain impact on crushing effects and economics. Superheated steam is superior to air in fluidity and critical flow rates to achieve higher flow rates and uniform flow fields. However, using superheated steam as a working fluid, it must be ensured that it is still in an overheating state before entering the product capture device, otherwise the material is condensed.
3. Feeding speed

Feeding speed is an important parameter reflecting gas flow grinding production capacity. During the pulverization process, the optimum ratio of the intake flow rate and the feed speed is the key to improving the crushing efficiency. In general, under certain intake flow conditions, the feed speed is proportional to the particle size of the product. However, the feeding speed is too fast, which will increase the particle density, mutual interference, disadvantage of the particles, and difficult to achieve the sufficient and effective collision between particles, affect the crushing effect; although the feed speed is too slow, the particles stay in the crush area The time can be extended, which will reduce the particle density, reduce the collision rate, resulting in a decrease in production capacity and an increase in unit production energy consumption.
4. Granular limit

TurboGrinder of Calcium Carbonate In the pulverization process, as the material particle size is reduced, the crystallization and strength of the material increases. After reaching a certain degree, the particle size of the material is no longer reduced or reduced, that is, the crushing limit of the material is reached. At this time, the material specific surface area increases, the surface activity of the particles, the particle agglomeration and grinding are in a dynamic equilibrium state, even if the grinding time is prolonged, it is difficult to further reduce the particle size of the material.



ALPA potassium permanganate Turbo Grinder of Calcium carbonate case share: This customer is mainly engaged in the development of high energy chemical energy development. The study needs a device that can make ultraf fine pulverized in high potassium permanganate. Finally, I bought a Turbo Grinder of Calcium Carbonate in our Alpa.
Technical parameters:

100-325 mesh
Production capacity: 5kg

Turbo Grinder of Calcium Carbonate's daily maintenance is a very important part, Here is the maintenance method of Turbo Grinder of Calcium Carbonate.
1. When the machine starts or starts, the appropriate amount of grease should be applied to ensure its life.
2. Check if the screws and nuts of each component are tightened. Check if the belt is smashed, whether it is tight.

4, the direction of operation of the spindle should be correct. If it is incorrect, it should be handled in time to avoid damage to the machine.
5, equipment maintenance should be carried out by professional and technical personnel, and others must not be carried out to avoid damage to the equipment.
6, electrical components and lines should be checked regularly, whether it is intact, and the ground is reliable.
7. The equipment should be cleaned in time to prevent the next use to avoid contaminating materials.

For more consultation, please continue to pay attention to us, or inquire.