Rod Pin Mill of Bisphenol A

Rod pin mill of Bisphenol A This product technology has been widely valued by the industry. ROD pin mill OF BISPHENOL A is mainly used to determine its wide range of applications, high fine, typical materials: super hard diamond, silicon carbide, metal powder, high purity requirements: ceramic pigment, medicine, biochemistry, medicine . Rod Pin Mill of Bisphenol A can convert an ordinary gas from a gas source to an inert gas such as nitrogen, carbon dioxide, is an inert gas protection device, which is suitable for smashing, grading, and processing of flammable explosive, oxidative materials.

ROD PIN MILL OF BISPHENOL A is in full closed state, the pulverized particles are fine, the granular shape is good, the yield is also large, the pulverization process is no dust, and the material is purity after crushing, greatly saved. Raw materials. Rod Pin Mill of Bisphenol A can reach the effect of cell breakage during pulverization, so that the effective component dissolution of the medicinal material is greatly improved, and the efficacy is also easier to be absorbed by the human body. Experts pointed out that after pulverizing the gas flow crusher, the minimal component can reach the original efficacy. During the pulverization process, it can work according to different medicinal materials and crushedness, generally use a gas flow pulverizer to pulverize the drug. It is possible to save resources between 30% and 70%.

Alpa Powder: Non-Metallic Melting Composite Rod Pin Mill of Bisphenol A Case Sharing:

A new material company is a national high-tech enterprise integrating R&D, production, sales and technical services. The company focuses on the pressure and challenges of our customers, excavation of the potential of inorganic non-metallic materials, integrates all kinds of organic materials, providing excellent functions and low-cost split solutions, vigorously expands in new energy, Application of New Materials, Environmental Saving and Energy Saving and Other Fields.

The company and the domestic inorganic non-metallic materials, cooperation, benefiting the ecological chain platform, serving the ecological chain platform, serving major multinational companies, listed companies and excellent domestic small and medium-sized enterprises, and continuously introducing cost-effective products, Create customer value and achieve capital appreciation.
Case parameters:
Product particle size: D100: 14μm

Rod Pin Mill of Bisphenol A daily maintenance
1, during production, the bearing must be checked often The temperature rise, when the temperature rise exceeds 50 ° C, should be closed, and the reason is to rule out the fault.

2, when the new machine is running, the drive belt is easy to elongate, and should pay attention to adjust the appropriate looseness of the belt to ensure the work life of the belt.

3,If the lifting piece should be checked frequently, replace the production quality and production in time.
4, the blade, the bushing should often check the wear situation. If the wear is worn, the productivity is lowered, and the particle size is replaced after the particle size is replaced.
5, the host and the graded flow bearing are lipids, and the No. 2 special lipids are used 265-295.
6, the replacement period of the bearing is 2000 hours, and the amount of the grease is filling the amount of the space in the bearing cavity (episode) or 3/4 (lower test) cut, not too much to fill the grease, otherwiseThe bearing temperature is too high.
7. The spiral feeder has been changed during the change of the lipid of 4,000 hours, and the calcium-based grease is added.

Welcome everyone chooses our Shandong AlPa, the company specializes in the production and development and service of airflow pulverizer product technology, the company provides customers with safe and reliable ROD PIN MILL OF BISPHENOL A products and services to solveThe worries of the majority of customers.