Impact Mill Machine for Chili Stick

The people currently used in daily life are also more, the airflow pulverizer is smashed into the standard size, which is generally smashed into micrometers, usually our equipment is more The device is constructed, usually composed of a portion of a coarse, fine powder or a wind device, or the like. The main purpose is to use wind energy to be powdered, and have canceled the traditional screening at the time of use. The main application is more useful in many industries such as mining or building materials. Some industries such as metallurgical or building materials, chemicals, etc. are useful to use large crushers for work.

Impact Mill Machine for Chili Stick has a wide range of pulverized granularity, simple and convenient, but during the pulverization process, there is often a case where the crushing effect is different.

The crushing effect is mainly affected by the following factors:

The temperature and pressure of the gas ratio, the feed particle size, the working fluid, and the pulverization aid. The gas-solid ratio of the pulverizer in crush is an important technical parameter and an important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. But if the gas is too high, not only will waste energy, but will even degrade the dispersion performance of certain pigments.

When pulverizing hard materials, there is a stricter requirement for the particle size of the feed. In terms of titanium powder, it is necessary to control 100 to 200 mesh when pulverizing calcination; the material after pulverizing surface is generally 40 to 70 mesh, and cannot exceed 2 to 5 mesh.
So, should you choose how high pressure when crushing? Those skilled, this is mainly dependent on the comminutability and fineness requirements of the material.

Technical parameters:
Finished particle size: 10-45μm
Production capacity: 300kg

When the pulverizer is running at high speed, the operation member boosted the air to generate a \"\" called the sound;
2 When the device is running, the vibration sound produced;
3 turntable or hammer and the drug between the drug;
4 Equipment Rotate PartsThe friction occurring in the body.
I know why Impact Mill Machine for Chili Stick has excessive noise, we can find a way to solve:
1 Each of the rotating parts is added to the oil, if the bearing and the axis is misal, adjust; bearing wear,Replace the bearing;
2 The heat generating phenomenon will also generate noise, and the pulverizing chamber is watering cooling clamp;
3 is at the discharge space, install the muffler;
4 to vibrate the equipmentTreatment, such as vibration damping pad.
If your Impact Mill Machine for Chili Stick has a similar problem, you can refer to the above situations and programs.

If there is related requirements, please call us!