Rod Pin Crusher Of Barite Powder

Rod Pin Crusher Of Barite Powder as a clean, efficient, high-level, high-yield of advanced crusher model in the pulverization of Western medicine producers, is very wide, from a few tens of grams of trace test Large-scale production of hundreds of tons of production, air flow milling with narrow particle size distribution, average particle size; good powder shape, high product purity; suitable for low melting point, thermal drug; good sealable, low pollution Easy to operate; crushing - mixed - dry online operations have been widely recognized by the company.

The customer needs to perform airflow grading to the iron phosphate ultrafine powder, eventually experimenting with our company's grading function to meet the customer needs.
Product particle size: D97: 18μm
Hour Yield: 80kg / h

1. Preparation before the pulverizer is started to check whether the host, joint, pipeline, and the valve are normal and working properly.
2, open the pulverizer

(1) Open the compressor power supply, dustpress pressure valve and the main air valve, open the power switch of the pulverizer, turn on the power switch.

(2) From zero, gradually adjust to the specified speed.

(3) Open the fan, cyclone separator, dust removal and charger power, open the total power box, set the frequency of the inverter, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, pulverizer shutdown sequence is: inverter - feeder - main valve compressor - Compressive plane impeller motor - cyclone material, dust removal switch - fan - General power supply air compressor.
4, eddy current pulverizer maintenance and maintenance

(1) Periodically lubricate the eddy current pulverizer, but the lubricating oil should not be too large to prevent too high of the bearing temperature.
(2) Check the wear of impeller, screw conveyor and crushing nozzleThe situation is very important.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag is filtered, it should be cleaned or replaced.
5, eddy current pulverizer precautions

(1) When the device is running, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller should not exceed the specified requirements, otherwise the temperature is too high, the impeller and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.
Welcome to Shan Dong Alpa, the company specializes in the production and development and service of Rod Pin Crusher Of Barite Powder product technology, the company provides customers with safe and reliable products and services to solve our customers.Have worry.