Cell Mill of WHDF

In many crushing methods, Cell Mill of WHDF has become one of the most mainstream pulverization techniques with a small particle size, a narrow particle size distribution, high purity, high particulate activity, and good dispersibility. Isolated from the pulverized drug or the like is not allowed to be contaminated.

First, the pulverized particle size is small, the distribution is uniform. Since the power distribution on the Cell Mill of WHDF is quite uniform. The ultrafine pulverizer is an apparatus for ultrafine pulverization of dry materials by using air separation, high pressure comminution, shear and other techniques. It consists of a cylindrical crushed chamber, a grinding wheel, a wear rail, a fan, a material collection system, etc. The setting of the grading system not only strictly limits large particles, but also avoids the occurrence of pulverization, thereby obtaining a uniform powder having a uniform particle size distribution. At the same time, the specific surface area of \u200b\u200bfine powder increases, and the amount of adsorption and solubility are also increased accordingly.
Second, reduce pollution, more environmentally friendly: ultrafine pulverization is carried out in a closed system, which avoids the pollution of fine powder to the surrounding environment, and prevents dust pollution products in the air. Therefore, Cell Mill of WHDF applies the technology to food and health products, which can effectively control the specific gravity of microorganisms and dust. The ultrafine pulverization speed is high and can be pulverized at low temperatures. Ultra-fine pulverization technology is smashed with ultrasonic air flow, cold grinding and other methods, which are completely different from the conventional pure mechanical pulverization method. After the gas fine particles are broken to the high-speed cyclone separator, the high-speed cyclone separator is broken, and the high-speed cyclone separator enters the coarse-grain separator, and then enters the coarse grain separation zone via the high-speed cyclone separator, and then enters the coarse grain separation area through high speed. Centrifugal separator.
Third, during the grinding process, there will be no local overheating phenomenon, and can even be smash at low temperatures, fast speed, and can be completed instantly.
Therefore, the bioactive ingredients in the powder can be minimized to produce the desired high quality products.


ALPA Raw Powder Cell Mill of WHDF Case Sharing:
A mechanical equipment company, company mainly produces pharmaceutical equipment and powder automation equipment, and proxy US and German import Equipment, the company has the advantages of technology and the team's cohesiveness has achieved rapid development and broke the monopoly of foreign equipment in the industry.
Case parameters:
Product particle size: D90: 2-80μm
Hour Yield: 50-80kg

How to operate Cell Mill of WHDF?
before power on, the connection site , Seal and lines, etc., in detail, everything is not problematic, and the powder classifier can be run.
should be operated in the boot ordermachine.3 minutes before shutdown should be stopped, then shut down, the order is opposite to the boot order.
The amount of feed should be determined according to the size of the powder grading machine load, ensuring that the host is in the state of rated load.The particle fineness can be adjusted to adapt to the grading requirements.
Debutors such as the heat-sensitive material, then the power of the main motor is slightly lower than the rated power.The size of the air volume in the delivery line can be achieved by adjusting the damper of the fan.