Rotor Grinder for Pine Bark

In many crushing methods, Rotor Grinder for Pine Bark has a small particle size, a narrow particle size distribution, high purity, high particulate activity, and good dispersibility, especially in particular. Applicable materials such as crushing drugs such as contaminated materials.

During the production process of crushing using Rotor Grinder for Pine Bark, the ultrasonic air flow generated by the device can constantly collide between materials, and this supersonic airflow can also produce raw materials. A very good impact, and then the material can also have a good crushing effect with the inner wall of the equipment.

ALPA Tie Bark Rotor Grinder for Pine Bark Experiment: Talcium grading machine is an apparatus that is often used in talc production, and our alpa classifier has excellent performance, and many talc producers come to us. The company conducts talc grading experiments. Product particle size: 230kg / h
Our alpa classifier can meet the slide grading requirements of different yields of different granular sections, if you have a talc grade demand, it is not sure that the grading granularity can not be Implementation, please contact our customer service, we will contact you in the first time and verify that you can achieve your hierarchical needs.

In the production process, the temperature rise of the bearing must be often checked, and when the temperature rise exceeds 50 ° C, it should be closed, and the reason is to trigger the failure. When the new machine is running, the drive belt is easy to elongate, pay attention to adjust the proper looseness of the belt to ensure the work life of the belt. If the lifting piece should be checked frequently, replace the production quality and production in time. The blade, the bushing should often check the wear situation. If the wear is worn, the productivity decreases, and the particle size is roughly discovered to be replaced. The host and the grading flow bearing are lipomatic lubrication, using special lipids, the replacement period of the bearing is around three months, and the filling of the grease is 1/2 of the interior space in the bearing cavity. Otherwise, It will cause too high of the bearing temperature. The spiral feeder has changed the lipid period of half a year, and Cape Calcium-based grease. In the output shaft E, ie the pulley E, avoiding the weight of the weight, damage the part. It is strictly forbidden to turn the handle on the stop. The lubricating oil used in this regulator is used with N32 alkaline high-zinc high-grade anti-motor oil pressure oil, and the deceleration machine is 401 generally lubricating oil, and it is not necessary to use other machines. After four or five months, new oil should be replaced.

If you have the situation about other crushers, you want to know, welcome to consult!