Pin Crusher Of Dolomite

With the continuous advancement of pulverizer technology, Pin Crusher Of Dolomite has been familiar with people. Now the most popular crushing equipment is Pin Crusher of Dolomite. It has a wide variety, available for laboratory, home and factory use. It has a wide range of production, high energy consumption, high automation, and high classification quality.

For the service life of Pin Crusher Ofdomite, it has always been kept in mind, and it is necessary to keep in mind.
1, for the newly purchased equipment requires novice necessary to understand its operating specifications. If it is a novice operation, it is necessary to prevent unnecessary losses during the operation.
2, if the machine is abnormal, if the machine is abnormal, it is necessary to keep the mechanical personnel to repair debugging and turn off the power. Non-designated personnel prohibit private commissioning or disassembly machine components during the maintenance process. When repairing commissioning, you must turn off the machine power.
3, the PIN CRUSHER OF Dolomite is cleaned in time after use. Keep the internal cleaning of the PIN CRUSHER OF Dolomite to avoid oxidation of the material and the inner contact.


ALPA Graphite PIN CRUSHER OF DOLOMITE Case Sharing: This customer is a research institution, during its research, the graphite needs to be superfined. Through multiple incoming experiments, we finally chose our Alpa's PIN CRUSHER OF Dolomite.
Technical parameters:
Finished granularity: D50: 10-30μm

In order to have a further understanding of Pin Crusher Of Dolomite, the following is simple Analyze the common problems of pulverizer and how to solve these problems.
1, ask: How to choose equipment in the face of materials that need to be smashed?
A: (1) Moh's hardness is less than 3. The mechanical grinding machine and hierarchical impact mill can meet the crushing requirements, saving a certain cost. (2) High hardness, high purity material is higher than 3.5 hardness. (3) If it is a metal powder, you can atomize the grading and cannot be broken.

A: (1) After the food and drug is crushing, it is necessary to meet the level of food safety, the best choice for stainless steel materials, because the mirror is polished inside and outside, does not produce iron pollution. (2) Broken material is easy to worn, and the purity is required to be high after crushing, and the stainless steel is optimal.(3) If the crushing requirements are not high, cost savings, the air pulverizer of carbon steel material can be used.
3, ask: When using a gas flow crusher, the fineness of the finished product does not reach the standard, how to adjust the classification wheel is not used?
A: (1) If the new custom pulverizer does not meet the requirements of the granularity, the device can be incorrect.
Therefore, in order to avoid such errors, it is best to perform material crushing and grading experiments before purchase, and carefully check whether the experimental results are satisfactory.

Shan Dong Alpa is committed to the development, production and sales of ultrafine powder and grading equipment, support according to demand, the equipment model is complete, the quality is reliable, the efficiency is high, the power consumption, the operation is simple, 24Hours can consult!