Rod Pin Crusher of Rubber Powder

With the continuous increase in social needs, Rod Pin Crusher of Rubber Powder is constantly improving using performance, finished product quality, service life, etc., very well, which is well processed into microtes and even nano-grade micropowder, and is already Wide applications in many areas such as chemical, food, pesticides, cosmetics, dyes, coatings, and electrons have been widely used.

A rod pin Crusher's cost is very high. If you want to use Rod Pin Crusher's Rubber Powder for a long time, please pay attention to the following:

1. During the production process It should often check the temperature rise of the bearing, when the temperature rise exceeds 50 ° C, should stop the examination, find out the cause, and troubleshoot.
2. When the new machine is running, the transmission belt is easy to eliminate, so it should be noted to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Test and timely replacement of vulnerable parts should be performed in time to ensure quality and production.
4. The wear of the blade and bushing should be continuously checked. If the productivity is lowered, the particle size is thick after wear, and the wear is immediately replaced.
5. Rod Pin Crusher of Rubber Powder's host and level score bearing uses special grease (265-295 degrees) lubrication.
6. The replacement period of the bearing is 2000 hours, and the amount of oil filling of the bearing chamber gap is 1 ≤ 2 (try) or 3 ≤ 4 (try), if it is not too much, the bearing temperature Will be too high.
7. The replacement period of the spiral feeder is 4,000 hours, and ordinary calcium based grease is added. Standard operation to exchange for longer use of airflow crushers.

The above is a seven-point introduction to the rod pin Crusher of Rubber Powder's daily maintenance.


ALPA Graphite Rod Pin Crusher of Rubber Powder case sharing: This customer is a research institution, during its research, the graphite needs to be superbly pulverized. Through multiple incoming experiments, we finally chose our AlPa Rod Pin Crusher of Rubber Powder.
Technical parameters:
finished particle size: D50: 10-30μm
Production capacity: 30-50kg

1. Before using the pulverizer, first check whether all fasteners of the machine are tightened and the belt is fastened.
2. The spindle direction must be consistent with the direction of arrow on the shroud, otherwise it may damage the machine and cause personal injury.
3. Check if the crusher is complete.
4. Check if the gas flow pulverizer has a hard object such as metal in a crushing room, otherwise it will damage the tool, affect the machine.
5. You must check the purity of the material before crushing.Metal hard materials are not allowed to avoid damage to the tool or cause combustion.

7. Stopping before stopping.If you do not continue, remove the residers from the machine.
8. Regular inspection tools and screens are damaged.If damage is damaged, it should be replaced immediately.
9. There will be slight vibration when using the fuselage.Be sure to tighten the cover to connect the handle to avoid accidents.

If there is related requirements, please call us!