Rotor Mills of Peanut Peel

Rotor Mills of Peanut Peel is a crushing device commonly used in industrial production. Due to its excellent performance, it is widely used in the crushing operations of various materials. Although the efficiency of this work is very prominent, we still have to look at the machine, just like a normal machine, check the machine, eliminate the machine failure, make the machine more efficient and safely.

The Rotor Mills of Peanut peeel forms a set of pulverization systems. After the compressed air is dried, it is sprayed into the pulverizing chamber by the Lavar nozzle, and the material is repeatedly collided, friction, shear and pulverized, and the crushing material is pulled down with the wind turbulence. Airflow movement to the hierarchical region, under a powerful centrifugal force generated by high speed rotation, so that the crude material is separated, and the fine particles that meet the particle size requirements are collected by the grading wheel into the cyclone and the dust collector, and the crude particles drops to the pulverizer to continue pulverization. . Since the crushing chamber structure of Rotor Mills of Peanut Peel is simple, it is easy to manufacture, so it is widely used.

ALPA Crystalline Sulfur Rotor Mills of Peanut Peel Case Sharing: Shenyang needs a device that can make ultrafine pulverization of crystalline sulfur. Crystalline sulfur is a flammable and explosive raw material, so there is a very high demand of the explosion-proof system of the pulverized apparatus. After many examinations, our company's nitrogen protection Rotor Mills of Peanut Peel met the production needs of the company. Rotor Mills of Peanut Peel has advantages in security, production capacity, energy consumption.

Technical parameters:
Finished granularity: 200-300 mesh
Production capacity: 1.5T

During production, we should pay attention to maintenance and maintenance of Rotor Mills of Peanut Peel. .

1. In the production process, the bearing temperature should be checked regularly. When the temperature rises above 50 degrees Celsius, the machine should be stopped to find the cause and troubleshoot.

2, when the new machine is running, the transmission belt is easily elongated. Pay attention to adjust the appropriate tightness of the belt to ensure the life of the belt.
3, which should be regularly inspected, replace it in time, ensuring production quality and production.
4, the wear of the blade and lining should be checked regularly. If the productivity is lowered after the wear, the grain size is thicker and the wear is immediately replaced.
5, the host and the hierarchical flow bearing use grease lubrication.

6, the replacement period of the bearing is 2000 hours, the amount of the grease is 1/2 or 3/4 of the bearing cavity space. (Lower test) Can not be filled too much oil, otherwiseThe temperature of the bearing will be too high.
7, the spiral feeder changes the fat period of 4,000 hours, plus ordinary calcium based grease.
8, in the output shaft E, i.e., pulley E, avoid heavy hush, damage to the part.
9. It is strictly forbidden to turn the handle of the handwheel in the stop.
10, the lubricator used by the governor adopts N32 alkaline high-zinc high anti-milling oil, and the reducer uses 401 universal lubricants and cannot be replaced by other machines.
11. After 3000 hours, the new oil should be replaced, and then used after 500 hours of oil for the second change, then use it after 1000 hours.

Rotor Mills of Peanut Peel has a lot of normal use specification, I want to know more about the ultra-fine glow grace machine, welcome to consult with us!