Cell Mills of Anode Material

Publish: 2022-01-11 09:48:34

Views:

With the rapid growth of China's economy, high-energy mining machinery industry, especially Cell Mills of Anode Material will have a huge development space, and various mineral powder products will develop rapidly. In order to ensure sustainable development of the entire mineral powder industry, green, environmentally friendly, healthy fluidized bed jet mills and products are more extensive. When applied to people's lives, it is necessary to optimize the use of equipment technology.

Cell Mills of Anode Material is operated in compressed air, gas or high pressure overheating steam. Cell Mills of Anode Material has no movable parts, thus eliminating pollution caused by contact with external grinding media. It is also an ideal process for grinding thermal and waxy materials because wear heat is not produced. Cell Mills of Anode Material is used for fluid energy. Micronization and grading are carried out in a shallow cylindrical chamber. The high pressure air or steam is injected into the chamber by a specially designed nozzle placed on a peripheral wall.

ALPA Cell Mills of Anode Material Coll Mills of Anode Material: This customer is mainly engaged in high energy chemistry, hydrogen production and hydrogen energy development, special gas, fine chemical, environmental engineering, etc. The research institute requires a device that can be superfined with sodium chlorate. Find a domestic powder equipment enterprise. Finally, I bought a Cell Mills of Anode Material in our AlPa.

Technical parameters:
Finished particle size: 100-325 mesh
Production capacity: 500kg

Let me introduce the operation method of Cell Mills of Anode Material.

1. Before using the pulverizer, first check whether all fasteners of the machine are tightened and the belt is fastened.
2. The spindle direction must be consistent with the direction of arrow on the shroud, otherwise it may damage the machine and cause personal injury.
3. Check if the crusher is complete.
4. Check if the gas flow pulverizer has a hard object such as metal in a crushing room, otherwise it will damage the tool, affect the machine.
5. You must check the purity of the material before crushing. Metal hard materials are not allowed to avoid damage to the tool or cause combustion.
6. The oil cup on the machine should always note the full lubricant to ensure that the machine is operating normally.
7. Stopping before stopping. If you do not continue, remove the residers from the machine.
8. Regular inspection tools and screens are damaged. If damage is damaged, it should be replaced immediately.

9. There will be slight vibrations when using the fuselage.Be sure to tighten the cover to connect the handle to avoid accidents.

If there is related requirements, please call us!

Previous: Rod pin MILL for Marble

Next: Hammer Mills of CEMENT