Rod pin MILL for Marble

In many crushing methods, Rod pin mill for Marble has become one of the most mainstream pulverization techniques with a small particle size, a narrow particle size distribution, high purity, high particulate activity, and good dispersibility. In particular Applicable materials such as crushing drugs such as contaminated materials.

The crushing material moves together with the rising airflow to the pulverized region under suction of the fan, producing a strong centrifuge generated by a high speed rotary pulley. Under the action of force, the fine particles are separated, and the cyclone and dust collectors are collected by the pulverizing wheel according to particle size particles, and the coarse particles fall into the pulverized region to continue to be pulverized.

ALPA Cobalt Sinks Rod Pin Mill for Marble Case Sharing: Some Lithium Electric Materials, Beijing, purchased a Rod Pin Mill for Marble from our AlPa in 2020. Ultrafine pulverizer for lithium cobaltate, the company has three particle size requirements for lithium cobaltate, requires a device to be simultaneously satisfied. In response to the company's unique needs, our ALPA engineers have been working hard to customize a Rod Pin Mill for Marble. The pulverizer can meet the production requirements of multiple particle size sections, equipped with subsequent airflow classifier systems, and can be sorted by different particle size products.

Finished particle size: lithium cobaltate small particles D50: 3-6 μm; lithium cobaltate large particles: 50: 8-20 μm; Trimetimeterials D50: 6-13μm;
Production capacity: Lithium cobaltate small particles: 250 kg of lithium cobalt acid lithium large particles: 500KG ternary: 500kg


Temperature rises must be checked frequently, when the temperature rise exceeds 50 ° C, stopping Check, identify the reason is to troubleshoot. When the new machine is running, the drive belt is easy to elongate, pay attention to adjust the proper looseness of the belt to ensure the work life of the belt. If the lifting piece should be checked frequently, replace the production quality and production in time. The blade, the bushing should often check the wear situation. If the wear is worn, the productivity decreases, and the particle size is roughly discovered to be replaced. The host and the grading flow bearing are lipomatic lubrication, using special lipids, the replacement period of the bearing is around three months, and the filling of the grease is 1/2 of the interior space in the bearing cavity. Otherwise, It will cause too high of the bearing temperature. The spiral feeder has changed the lipid period of half a year, and Cape Calcium-based grease. In the output shaft E, ie the pulley E, avoiding the weight of the weight, damage the part. It is strictly forbidden to turn the handwheel when stoppinghandle.The lubricating oil used in this regulator is used with N32 alkaline high-zinc high-grade anti-motor oil pressure oil, and the deceleration machine is 401 generally lubricating oil, and it is not necessary to use other machines.After four or five months, new oil should be replaced.

To learn more about Rod Pin Mill for Marble, please pay attention to the Shan Dong AlPa website. The company is trustworthy by the company's research and production of crusher and other products, quality.