Ring Roller Grinder of Heavy Calcium Powder

With the continuous advancement of pulverizer technology, Ring Roller Grinder of Heavy Calcium Powder has been familiar with people. Now the most popular crushing equipment is Ring Roller Grinder of Heavy Calcium Powder. It has a wide variety, available for laboratory, home and factory use. It has a wide range of production, high energy consumption, high automation, and high classification quality.

Many manufacturers who want to make a crushing process will choose to buy a Ring Roller Grinder of Heavy Calcium Powder, but not all crushers can apply production and processing, erroneous processing methods will make pulverator wear velocity Go fast. The mill is wear is too fast, and the inner cavity of the pulverizer of the material should be selected when the material hardness is too large.

The device operates for a long time in a higher crushing pressure, which requires uniformity of cyclical replacement losses.
The product after the crushing products are generally single peaks. If there is a double-peak or multimodal main reason, the pulverization pressure is unstable. The solution is based on the gas supply of gas source equipment to meet the amount of gas required for work, ensuring that the lowest gas supply pressure of the gas is high than the working pressure.
The feed speed is unstable. Solution to check if there is a blockage at the feed valve; the material is not very viscous, uniform liquidity, and the stable control feed speed. A filter cake is formed in the pulverizer chamber. The solution is suspended, and the filter cakes in the crushed chamber will then return to the production.

Technical parameters:
finished particle size: D99.9: 180 mesh
Production capacity: 400kg

1, during the production process, the temperature rise of the bearing must be regularly checked. When the temperature rises to 50 ° C, inspection should be checked, find a reason, troubleshooting.
2, when the new machine runs, the transmission belt is easily stretched, and the tightness of the belt should be adjusted to ensure the life of the belt.
3, regular inspection of the lidsCheck, promptly guarantee the quality of production and production.
4, the blades and bushing should always check the wear situation.When wear, the productivity is lowered, and the grain is thick.
5, host and gradient flow bearing oil grease lubrication, dedicated grease, and degree 265-295.
6, the cycle of the bearing is 2000 hours.The amount of the grease is filled into a 1/2 (upper test) or 3/4 (below the test), so we can't add too much grease.Otherwise, the bearing temperature is too high.
7. The spiral feeder is 4,000 hours, plus ordinary calcium based grease.