Rotor Mills of CEMENT AdmiXTure

The people currently used in daily life are also more, and Rotor Mills of CEMENT AdmiXTure is smashed into standard size, which is generally smashed into micrometers, usually our equipment is With multiple devices, it is usually composed of coarse, fine powder, or a wind device or the like. The main purpose is to use wind energy to be powdered, and have canceled the traditional screening at the time of use. The main application is more useful in many industries such as mining or building materials. Some industries such as metallurgical or building materials, chemicals, etc. are useful to use large crushers for work.

Rotor Mills of CEMENT AdmiXTure is a high-speed airflow to form a high-speed airflow using a plurality of relative-arranged nozzles to achieve ultrafine pulverization. The crushed material enters the pulverizing chamber with the rising air flow, since the pulverized rotor is high-speed rotation, the particles are subjected to the centrifugal force generated by the pulverized rotor, and the center of heart is generated by the viscous action of the gas flow. When the centrifugal force of the particles is greater than the heart force, that is, the pulverized particle size The coarse particles return to the pulverizing chamber to continue the impact, fine particles flow into the cyclone separator, collectors, and the gas is discharged from the air.

Low temperature without media, ensuring high purity and physical properties of the product. The equipment runs no dust pollution in a negative pressure state. The full use of jet flow can increase the pulverization efficiency of 30% compared to conventional gas flow grinding machines, and the precision is higher.

ALPA equipment is small, and the structure of the pulverizer can be highly machined so fine powder, avoiding the wear of the horizontal crusher pulverized part, and the equipment of the equipment is used under the same material. Multiplier. Small granularity is wide, and the product particle size can be arbitrarily adjusted within 1-74um.

Technical parameters:
finished particle size: D90: 800 mesh
Production capacity: 800-1000kg

The cause of the airflow grinding main shaft is easy to damage:
1. Since the pulverizer is a long-time crushing and ground bulk ore, the mechanical impact will cause fatigue damage to the spindle, if it is operated, the surface of the spindle Will wear, if you don't pay attention, cracks are generated.
2. The air supply will pass the airflower overload. When gas flow is used, you need to feed it properly, and each machine is limited. If this is exceeded, the component is easily damaged in the load operation, which will affect the overall service life of the airflow.
3. During mining and transportation, ore is often mixed with some waste metals. When these objects are in electromagnets at the upper portion of the belt, the electromagnet cannot be Excluding, causing these materials in ore and mud into gas flow, resulting in frequent iron, resulting in frequent impact on the spindle and other portions.
The above is why the Rotor Mills of CEMENT AdmiXTure spindle is easily damaged.

If there is related requirements, please call us!