IMPACT MILL MACHINE for Sorbitol

Impact mill machine for Sorbitol is a very easy to use the device, it can be used attrition milling of various products, especially those products need to use fine particles.

Impact mill machine for Sorbitol as pulverization the kinetic energy of high-pressure air into the periphery of the grinding chamber is regulated gas stream packet distribution station, gas flow through the Laval supersonic jet acceleration crushed into the crushing chamber, the venturi nozzle and the material into the crushing chamber synchrotron mill.
Since the flow cycle of the jet of the crushing chamber and the animal feed, the particles and the particles and the fixed target wall hit, collide, friction, and grind. The fine particles were opened into the center of the pulverizer, and the cyclone separator was entered at the drive of the heart flow, and the coarse powder was thrown into the periphery of the pulverizing chamber, and cycled under the action of centrifugation and continued to be pulverized.

Technical parameters:
Finished particle size: 200-300 mesh
capacity: 1.5T

1, to be carried out in accordance with the provisions when using the classifier to use, not to exceed the scope of use, because the machine will be very damaged.
2, if the superfine classifier is running, the operator does not stand in the range of rotation to avoid accidents.
3, the staff is in the work, in order to ensure their own safety, wear a well-dressed work apparel.
4, when the classifier is added, do not add hard, because the hard object will damage the machine.
5. If the classifier begins to work, the staff should not leave and prevent problems.
6. If the superfine grade machine is found, it is necessary to stop checking.
7. Do not open the cover or other actions before the classifier is not completely stopped, if you want to operate, you need to stop the machine completely.