Rod Pin Mills for Donkey-Hide

Publish: 2021-12-08 10:49:35

Views:

In the rapid development of rapid development, many people have a certain understanding of Rod pin mills for Donkey-Hide, and crusher technology is in an absolute leader in the industry.

ROD pin millS for Donkey-Hide is an industrial equipment that consists of a ball mill and a vibrating mill. The power is 0.75 kW. With the development of society and the needs of people's lives, the industrial community is getting bigger and bigger, and the requirements for fineness, purity and pass rate are increasing, and the processing rate is very high. Micro-powder equipment is usually extremely expensive and low productivity.

ALPA Gypsum Rod Pin Mills for Donkey-Hide case share: The company is a more well-known non-metallic mine enterprise in South Africa. The company's main product is a super fine ultra-fine powder of non-metallic mine such as stone and gypsum. The company learned our equipment through our website and read our case. Finally, choose Rod Pin Mills for Donkey-Hide purchased as its plaster ultrafine powder production line.

Technical parameters:

finished particle size: D97: 5μm
Production capacity: 140kg

For long-term \"health\" of the equipment, we need to take some measures to carry out protect.

1. First, the gap of the hammer screen can be adjusted: the friction on the screen changes varies from the distance between the material and the screen, and the friction is different. Improve the hammer speed and hammer material efficiency by adjusting the hammer net gap. However, during the production process, the screens they use are different, the raw materials are different, the hammer screening gap needs to be adjusted; in the crusher, the crusher is not very good at the beginning, but after a period of time Work, the particles inside the crusher also changes; in the grinding machine parts, the hammer head is easily worn, and the gap between the hammer head and the screen is increased, and the yield is also declining, it is difficult to maintain.

Of course, in order to test the yield of a crusher, for some of the raw materials, for some screen holes, in order to determine the appropriate hammer sieve gap and suction, the useful life of the screen and the hammer can be obtained in a short time. Very high grinding efficiency data. However, in the production of feed grinding, such specific measurement data, according to the operator's work experience, the technical content of the crusher itself is two things. People with enrichment of experience and labor experience also require higher operating costs. When the hammer is worn, the gap between the hammer and the sieve increases, the friction is reduced, and the abrasive efficiency is lowered.
2. ROD PIN MILLS for Donkey-Hide mainly requires rational use of reverse glitch: mainly to rush the side hair of the screen into the inside, greatly increase the friction, but this method is not used for a long time. hairAfter the puncture polishing, the efficiency is lowered.It lasts for 30 minutes to 1 hour.
3. Put the friction piece into the Rod Pin Mills for Donkey-Hide: The friction piece has the effect of the material ring, but the effect is limited.First, the teeth of the friction plate are in front of the hammer head, the friction surface is small, and the hammer is long-lasting; if the sieve area is too small, the output screen area will be reduced.
For any of the equipment, everyday maintenance can be performed, it can ensure that the equipment can run for a long time, so daily is critical to the maintenance of ROD PIN MILLS for Donkey-Hide.

If there is related requirements, please call us!

Previous: Cell Crusher of Polyacrylate

Next: Cell Grinder for Wettable Powder