Rod Pin Mills for Hot Melt Glue

Rod pin mills for Hot Melt Glue plays a vital role in the current industrial production. In major minerals, chemical industry, pharmaceutical industry, and food manufacturing industries are widely used. With Rod pin mills For Hot Melt Glue, the major industries are often proposed, the food industry is proposed in the pulverization process. The new requirement, I hope the powder can keep it clean. In traditional ROD PIN MILLS for Hot Melt Glue, carbon steel, stainless steel is generally used as the lining material of Rod Pin Mills For Hot Melt Glue.

Under the action of the high-speed rotary impeller, the gas pressure flowing through the impeller increases, and the high pressure airflow flows out of the impeller, the fine particles are ejected. Since the blade of the rotary vane is designed as a bending, the inlet is large, the exit cross-sectional area is small, so the airflow pressure at the outlet is reduced, the speed increases, and the rotational flow is conducive to classification.
The grading point adjustment mechanism sets three adjustment rods and keeps its synchronous motion using the chain. When the adjustment rod moves up, the fine powder increases; when the adjustment rod moves down, the fine powder is reduced. The graded point can be continuously adjusted, and the particle size of the ROD PIN MILLS for HOT MELT GLUE can be adjusted. The granular weight of the grading weight can reach D97 ≤ 3 ≤ 150 microns, which is suitable for fine grading of dry micrometer products.
The setting of the control ring is to ensure that the control ring is formed between the control ring and the radial particles ring, and the stability of the airflow flow is controlled. The residual windlet inevitably introduces excess gas from the dry material, the temperature of the classification chamber is high, and the air can expand, and therefore designed a residual tightening to maintain the stability and balance of the graded indoor airflow.


ALPA Peel Peas Rod Pin Mills for Hot Melt Glue Case Sharing: The company uses the food professional processing enterprises in R&D, processing and sales, and has been discovered by multi-party investment or the ROD of our alpa Pin Mills for Hot Melt Glue meets all needs.
Technical parameters:
Production capacity: 2T +/- 10%

How to properly operate ROD PIN MILLS for Hot Melt Glue?
Before power-on, the connection site, seal and The line and the like are meticulously check, and everything is not a problem before you can run the powder classifier.
The boot should be operated in the boot order.3 minutes before shutdown should be stopped, then shut down, the order is opposite to the boot order.

Debutors such as the heat-sensitive material, then the power of the main motor is slightly lower than the rated power.The size of the air volume in the delivery line can be achieved by adjusting the damper of the fan.

Users who want to view crusher related information can also log in to our website!