Rotor Grinder of Coke

In this economically flourished area, there are many people who know the airflow pulverizer, and Rotor Grinder of Coke technology is in a leading position in the same industry.

Which factors affect the performance parameters used by Rotor Grinder of Coke?

The following is a detailed description:

1. Feed granular control

Most Rotor Grinder of Coke has a certain upper limit requirement for the feed particle size. After entering the pulverization cavity, it can be sufficiently accelerated before collision and crushing with other particles. It is difficult to completely accelerate after large particles enter the pulverized cavity, which will allow them to stay in the machine too long, resulting in too high energy consumption. Therefore, in large-scale production of ultrafine powder, it is an effective way to pre-ground the raw material of the particle size is an effective pathway for energy saving.
2. Working medium

At present, the working medium of Rotor Grinder of Coke is mainly compressed air, superheated steam, inert gas, and the like. The choice of working fluid has a certain impact on crushing effects and economics. Superheated steam is superior to air in fluidity and critical flow rates to achieve higher flow rates and uniform flow fields. However, using superheated steam as a working fluid, it must be ensured that it is still in an overheating state before entering the product capture device, otherwise the material is condensed.
3. Feeding speed

Feeding speed is an important parameter reflecting gas flow grinding production capacity. During the pulverization process, the optimum ratio of the intake flow rate and the feed speed is the key to improving the crushing efficiency. In general, under certain intake flow conditions, the feed speed is proportional to the particle size of the product. However, the feeding speed is too fast, which will increase the particle density, mutual interference, disadvantage of the particles, and difficult to achieve the sufficient and effective collision between particles, affect the crushing effect; although the feed speed is too slow, the particles stay in the crush area The time can be extended, which will reduce the particle density, reduce the collision rate, resulting in a decrease in production capacity and an increase in unit production energy consumption.
4. Granular limit

Rotor grinder of coke In the pulverization process, as the material particle size is reduced, the crystallization and intensity of the material increases. After reaching a certain degree, the particle size of the material is no longer reduced or reduced, that is, the crushing limit of the material is reached. At this time, the material specific surface area increases, the surface activity of the particles, the particle agglomeration and grinding are in a dynamic equilibrium state, even if the grinding time is prolonged, it is difficult to further reduce the particle size of the material.


AlPa Pectin Rotor Grinder Of Coke Case Sharing: Yantai Ephegeral Shares, the company needs to purchase a crushUltrafine pulverization equipment for pectin.Through multi-party investment and incoming experiment, the company purchased our AlPa's Rotor Grinder of Coke as its pectin ultrafine pulverized equipment.
Technical parameters:
Finished particle size: 60-200 mesh

The bearing maintenance of the Rotor Grinder of Coke bearing parts is prone to failure, and wear in useBig, therefore requires regular maintenance, often refueling to increase the life of the bearings.The impact crusher is maintained daily to ensure that the crushing equipment is in good technical state, and can be operated at any time, shorten the residence time, improve the integrity of the crusher, reduce the wear, and extend the life of the crusher;Maintenance, mandatory, correct processing, maintenance and repair is not allowed to be used alone.

Welcome everyone to continue to pay attention to our website to learn more!