Hammer Mill of Nepheline

In the classification operation of industrial production at this stage, the use of Hammer Mill of Nepheline is mainly targeted by solid particles, and is the case where we are more commonly used in the product ultrafine pulverization process.

Hammer Mill of NepheLine is a set of grading systems, grading machines and cyclone separators, dust collectors, and airformations. It can be accurately classified from 200-5000 destination materials, and the material is moved by the casing of the stratigraphic airflow at the lower airflow at the bottom of the flushing airflow to separate the crude material. Separate, The fine particles that meet the particle size requirements are collected by the grading wheel blade gap. The crude particles are partially fine particles to hit the wall, and the roll wall drops to the secondary tight air, the strong Amoy of the second wind The washing is separated, and the fine particles rises to the secondary grade of the fractionation region, and the crude particles are dropped to the unloading port. This can be accurately graded out of the 1000 purpose powder required by this customer.

ALPA Precipitated Sulfate Hammer Mill of Nepheline Case Sharing: Shenzhen Chemical Raw Material Company requires multiple large production, low particle size precipitated sulfate crushing production line. Our AlPA is a large enterprise in the powder equipment industry, and our equipment is customized. Different companies are used to meet different needs of different companies. In response to the needs of the company, our company customizes the production line of five Hammer Mill of Nepheline, large mechanical crusher production lines to meet the customer's production needs.

Technical parameters:
finished product particle size: D50: 0.8-5μm
Production capacity: 4.5 +/- 10% / T

Let's introduce Hammer Mill of Nepheline Operation method.

1. Before using the pulverizer, first check whether all fasteners of the machine are tightened and the belt is fastened.
2. The spindle direction must be consistent with the direction of arrow on the shroud, otherwise it may damage the machine and cause personal injury.
3. Check if the crusher is complete.
4. Check if the gas flow pulverizer has a hard object such as metal in a crushing room, otherwise it will damage the tool, affect the machine.
5. You must check the purity of the material before crushing. Metal hard materials are not allowed to avoid damage to the tool or cause combustion.
6. The oil cup on the machine should always note the full lubricant to ensure that the machine is operating normally.
7. Stopping before stopping. If you do not continue, remove the residers from the machine.

8. Regular inspection tools and screens are damaged.If damage is damaged, it should be replaced immediately.
9. There will be slight vibration when using the fuselage.Be sure to tighten the cover to connect the handle to avoid accidents.

Shandong Shan Dong Alpa produces various types of crushers, can have a variety of materials such as medicinal materials, ingredients, chemicals, etc., the highest effect can be more than 10,000.Our products are non-standardized products, which will customize their products according to your needs, and make a reasonable offer according to the product.