Rotor Grinder for Inorganic Salts

Today's industrial requirements have significantly improved, and thinner powder is conducive to the deep processing of the product, thus makes the product more value. Rotor Grinder for Inorganic Salts can effectively improve the level of massage of materials and greatly improve productivity. The Rotor Grinder for Inorganic Salts has received much attention, and the prospect has also been optimistic about many people.

Rotor Grinder for Inorganic Salts work is also a factor affecting work efficiency. When the temperature of the working fluid is too high, the flow rate of the gas will increase. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy. When the titanium powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.

AlPA Peel Peas Rotor Grinder for Inorganic Salts Case Sharing: The company uses the food professional processing enterprises in R&D, processing and sales, and has been discovered by multi-examination or our AlPa's Rotor Grinder for Inorganic Salts to meet all needs.
Technical parameters:
Production capacity: 2T +/- 10%

Rotor grinder for Inorganic Salts It is necessary to clean the air pulverizer after long-term use. After cleaning the pulverizer, all machines must be removed. Detaching skill is also very good. When cleaning, the power supply can be turned off, and the remaining dust can be removed directly with a brush. We must remember to clean it layer by layer. When the displacement is removed, four screws on the base can be removed, and then remove the hopper. When the screen is removed, the airflow pulverizer door can be opened directly and the screen can be removed at the end. After the mobile gear is removed, the fastening nut is released first, and then the live teeth are separated from the spindle. Then move the mobile gear and put it safely. Remove the fixed gear, remove the screw and remove the fixed gear. Be careful when disassembling the gas flow crusher. Do not cause any damage to the components of the machine itself.

To learn more about the knowledge of Rotor Grinder for Inorganic Sals, please pay attention to the Shan Dong AlPa website, the company has multiplied quality in the development and production of crusher and other products.Welcomed by consumers, trustworthy.