Horizontal Air Classifier of slag

Horizontal Air Classifier Of SLAG temperature will rise, when the temperature of the working fluid is too high, the flow rate of the gas will increase. Taking air as an example, the critical speed at room temperature is 320 m / sec, and when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy. When the titanium powder is pulverized by overheating steam, the vapor pressure is typically from 0.8 to 1.7 MPa, and generally the pulverized calcined material is high, and the material after the pulverized surface is low.

What are the characteristics of Horizontal Air Classifier of Slag? Ultrafine gas flow classifier, especially for brittle materials, the hardness of the material is suitable in Moglide 1-3, such as graphite, kaolin, quartz and other non-metallic minerals. Due to the high speed of the microcomputer, the intake air is large, is used to grind heat sensitive materials, synthetic resins, sulfur, pesticides, food, Chinese herbal medicine, phosphoric acid, magnesium carbonate and other items.

How to correctly operate the Horizontal Air Classifier of Slag? Before the device is powered on, the connection site, sealing and line, etc., all check, there is no problem, and can run the powder classifier. The boot should be operated in the boot order. 3 minutes before the shutdown should be stopped, then shut down, and the order is opposite to the boot order. The amount of feed should be determined according to the size of the powder grading machine load, ensuring that the host is in the state of rated load. The fineness of the particles can be adjusted to adapt to the grading requirements. Depending on the heat-sensitive material, the device is separated, then the power of the main motor is slightly lower than the rated power. The size of the air volume in the delivery line can be achieved by adjusting the damper of the fan.

Shandong AlPa Powder Technology Co., Ltd. specializes in the production and development and service of Horizontal Air Classifier of Slag product technology, welcome to come to consult. The company takes perfect quality, excellent service, most affordable price, customer firstThe attitude provides the best pulverizer products and services for customers.