Single Classifying Wheel Classifier for kaolin

SINGLE CLASSIFYING WHEEL CLASSIFIER for Kaolin is a mechanical equipment applied to the production area, which is mostly used in pulverizing particles, fast pulverity, good accuracy.

Single Classify Wheel Classifier for Kaolin production line Usually there is a pulverizer, bucket hoist, storage box, vibration feeder, ultrafine mill, frequency classifier, cyclone powder collector, pulse dust removal system, high pressure blower, air compressor, electrical control system and other components . Eliminates the infrastructure construction link, saving overall production costs, reducing material consumption. In addition, crushing and grinding operations can be completed, reducing equipment and minimizing cost investment.

Single Classifying Wheel Classifier for Kaolin's working principle consists of a classifier, a cyclone separator, a dust collector, and a guide. Under the pulverizer pulling force, the lower end of the gas pulverizer is moved upward to the grading area, and the coarse, and the fine product is separated from the high-speed rotation grading turbine. The cyclonic separator or dust collector is collected by the grading wheel, and the fine particles required to meet the particle size are collected, and the coarse particles are collected. The speed of the ellable fine particles disappears and falls along the two air ports of the cylinder wall. The crude particles and fine particles separated by strong purification of the two winds, and the fine particles rose to twice the grade region, and the crude particles drops to the discharge port.

Do you know how to use Single Classify Wheel Classifier for Kaolin? I hope the content below can help you. 1. Preparation before the comminution is started to check whether the host, joint, pipeline, and the valve are normal, working properly. 2, open the pulverizer (1) Open the compressor power supply, dustpress pressure valve and the main valve, open the power switch of the pulverizer, turn on the power switch. (2) From zero, gradually adjust to the specified speed. (3) Open the fan, cyclone separator, dust removal and charger power, open the total power box, set the frequency of the inverter, and then start charging. (4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel. 3, pulverizer shutdown sequence: Inverter - feeder - main valve compressor - compressive type impeller motor - cyclone material, dust removal switch - fan - universal power supply air compressor. 4, eddy current pulverizer maintenance (1) Regularly lubricate eddy current crushing machine, but the lubricant should not be too large to prevent the bearing temperature too high. (2) Check the wear of the impeller, screw conveyor and the crushing nozzle. (3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect. (4) After a filter bag, the vortex pulverizer is filtered, and it should be cleaned or replaced. 5, Eddy Current Crusher Precautions (1) When the discharge equipment is running, the unloading port cannot be reached, and the accident occurs. (2) The rotational speed of the impeller should not exceed the specified requirements, otherwise the temperature is too high, the impeller and the electric chance are damaged. (3) Regularly check the safety valve to ensure safety.