Hammer Grinder for Chemical Salt

In many crushing methods, Hammer Grinder for chemical salt has become one of the most mainstream pulverization techniques with a small particle size, narrow particle size distribution, high purity, high particulate activity, and good dispersibility. In particular Applicable materials such as crushing drugs such as contaminated materials.

Hammer Grinder for Chemical Sal should be installed in a place where the site is flat.

Before working, it is necessary to pick up the processing material, no metal, stone, etc., the hard substances are mixed into the machine, so as not to damage the parts or failures in the machine. Check that each component is firm and reliable before booting. Everything is normal, the side can turn on the power, idle for 1-2 minutes, check whether the operation is normal, everything is normal, it can be pushed.
When operating, the operator cannot leave. Once the sound is abnormal, the power should be disconnected immediately.

When machining raw new friends Chinese medicine crusher, the discharge opening should be tied to the bag. When the pulverizer is in use, if you encounter the power supply voltage, do not use it, so as not to damage the motor. When the power supply voltage is normal, the machine is not easily damaged, and the production efficiency is high.

ALPA Battery Powder Hammer Grinder for Chemical Salt Case Sharing:

A Industrial Company's main business scope is: new energy storage materials, electronic ceramic materials technology and industries, secondary resource re-production new technology and industries, Bioengineering and organic polymer materials, electronic products and network products technology development, technology transfer, technical training; manufacturing, sales and development products and related materials and equipment; international technical cooperation and related fields trade, technical personnel training; business capital Export business of enterprise self-produced products and technology and the import and export business of mechanical equipment, spare parts, raw materials and technologies required for this company.

Case parameters:
Product particle size: D50: 5.8μm
Hours Yield: 800kg

How should Hammer Grinder for Chemical Salt starts

The pulverizer is started before starting Rolling the rotor, check the jaw, hammer and rotor operation, is not flexible, there is no bump appearance in the shell, is the direction of the rotor in the direction of the arrow, the power machine and the pulverizer are not outstanding. Do not replace the leather wheel at will, to prevent the transition chamber produce burst of pulverization, or the speed is too low

affect the work efficiency of the pulverizer. After the airflow pulverizer starts, it should be idled for 2-3 minutes, no abnormal appearance, then press the job. At any time, you should pay attention to the job status of the crusher, and the feeding should be uniform to prevent jams, do not have long-term overload operations. If there is found that there is vibration, noise, the bearing and the body temperature is too high, and the outer spray is observed.Stop immediately after stopping, exclude the failure of the sustainable job.

The above is to introduce the Hammer Grinder for Chemical Salt, you can make a brief understanding, you need to purchase eddy current pulverizer, disc air crusher, users of ultrafine crusher products please contact us