Pin Grinder of ClodinAfop

Publish: 2022-01-10 11:40:30

Views:

PIN Grinder of Clodinafop is an industrial equipment. With the development of society and the needs of people's lives, the demand for various fine powder is increasingly demanding in the needs of people's lives. The higher, the application of the classification machine is also more extensive.

PIN Grinder of Clodinafop has several types: flat gas flow mill, fluidized bed foil mill, circulating tube gas flow mill, jet gas flow grinding and target gas flow grinding.

The main performance characteristics of the pulverizer:

1, the airflow pulverizer includes a vertical pulverizer. The size of the product can be adjusted between D97: 8 and 150 microns, with a good particle shape and a narrow particle size distribution. It can be used in series with a multi-stage crusher and produces a product having multiple particles.
2, the airflow pulverizer is easy to disassemble, the inner wall is smooth, no dead angle. The whole system is closed, the dust is small, low noise, and the production process is clean and environmentally friendly.
3, the airflow pulverizer control system adopts program control, easy to operate.

ALPA Battery PIN Grinder of CLODINAFOP Case Sharing: Shandong Yantai Chemical Materials Company, PIN Grinder of ClodinAfop, who has purchased a specially crushed battery material from our company in 2020. Technical parameters Product granularity: D50: 8-12μm production capacity: 50kg / h

PIN Grinder Of Clodinafop Daily Maintenance

1, during production, the temperature rise of the bearing must be checked, when the temperature rise At 50 ° C, the check should be stopped, and the reason is to troubleshoot.

2, when the new machine is running, the drive belt is easy to elongate, and should pay attention to adjust the appropriate looseness of the belt to ensure the work life of the belt.

3, if the loss case should be checked frequently, replace the quality and production volume in time.

4, the blade, the bushing should often check the wear situation. If the wear is worn, the productivity is lowered, and the particle size is replaced after the particle size is replaced.
5, the host and the graded flow bearing are lipids, and the No. 2 special lipids are used 265-295.
6, the replacement period of the bearing is 2000 hours, and the amount of the grease is filling the amount of the space in the bearing cavity (episode) or 3/4 (lower test) cut, not too much to fill the grease, otherwise The bearing temperature is too high.
7. The spiral feeder has been changed during the change of the lipid of 4,000 hours, and the calcium-based grease is added.

Users who want to view crusher related information can also log in to our website directly!

Previous: Rotor grinder of adhesive

Next: Impact Mills for pea protenin