Vibration Grinder of Fluorescent Brightener

Publish: 2022-01-06 16:57:35

Views:

In this economically flourished area, many people know that Vibration Grinder of Fluorescent Brightener, crusher technology is in a leading position in the same industry.

The Vibration Grinder of Fluorescent Brightener operates in compressed air, gas or high pressure overheating steam. The Vibration Grinder of Fluorescent Brightener has no movable parts, thus eliminating pollution caused by contact with external grinding media. It is also an ideal process for grinding thermal and waxy materials because wear heat is not produced. The Vibration Grinder of Fluorescent Brightener is used for fluid energy. Micronization and grading are carried out in a shallow cylindrical chamber. The high pressure air or steam is injected into the chamber by a specially designed nozzle placed on a peripheral wall.

ALPA sodium hydrogencarbonate Vibration Grinder of Fluorescent Brightener case share: The company often uses the Vibration Grinder of Fluorescent Brightener, and the sodium hydrogen sodium hydrozide is required. The company has won many power plant dry desulfurization projects with our AlPa's cooperation. It is very satisfied with the Vibration Grinder of Fluorescent Brightener we produced.

Technical parameters:

Finished particle size: 700 mesh
Production capacity: 800kg

Vibration Grinder of Fluorescent Brightener should maintain and maintain

1, before using, first check the equipment All standard parts are not tightened, and the belt is tight.

2, the spindle operation direction must conform to the direction of the arrow shown on the protective cover, otherwise it will damage the equipment, and may cause human damage.
3, check the electrical appliance is not intact.
4. Check the hardware such as metal-free materials in the equipment crushing room, otherwise it will damage the tool, affect the equipment operation.
5, the material must be checked before crushing, and there is no metal material hard article to be mixed to prevent crash or cause combustion.
6, the oil cup on the device should often be injected into the lubricant to ensure that the equipment is operating normally.
7. Stopping the feeding before the shutdown, if it does not continue to be used, clear the in the machine.
8. Check the tool with the screen on time is damaged. If it is damaged, it should be replaced first.
9. When using the timing, there is a small oscillation, so be sure to connect the handle to the handle to avoid accidents.

The Vibration Grinder of Fluorescent Brightener produced by our company can not only distribute 20-2μm from the ordinary powder, but also directly use the mechanical crushing equipment to form a closed circuit, improveCrushing efficiency, and can prevent high temperatures in the cavity to cause adhesion, glue, glue, causing operations that cannot be carried out, and at the same time, the grade machine has also received a good review, and the friends who need it are in contact with us!

Previous: Cell Crusher of Charcoal Powder

Next: Impact grinder of lithium fluoride