Cell Mills of Talc

Cell Mills Of Talc This product technology has been widely valued by the industry. Cell Mills Of Talc is mainly used to determine its wide range of applications, high fine, typical materials: super hard diamond, silicon carbide, metal powder, high purity requirements: ceramic pigment, medicine, biochemistry, medicine. Cell Mills Of Talc converts the normal gas from the gas source portion to nitrogen, carbon dioxide, etc., is an inert gas protection device for use in flammable and explosive, oxidative materials, smash, grading, and processing.

AlPa Pectin Cell Mills of Talc Case Sharing: Yantai's pectin shares, the company needs to purchase ultrafine pulverized equipment for pulverizing gelatin. Through multi-party investment and income experiment, the company finally purchased our AlPa Cell Mills of Talc as its pectin ultrafine pulverized equipment.

Finished granularity: 60-200 mesh
Production capacity: 300kg


Let's talk about the exclusion of Cell Mills of Talc common faults.

1 Cause the feed back. When this happens, you should find out the cause, then take elimination measures, or remove the valve, replace the powder bag, improve the breathability, or replace the hammer head.
2, bearing overheating: When the bearing lubrication is poor, the damage or the spindle bend, the rotor is severely imbalance, and the belt is too tight and the bearing is overheating. By replacing the lubricant, replace the bearing and spindle, balance the rotor and adjust the belt, the bearing can return to normal state.
3, the strong vibration of the airflow pulverizer: The mounting hammer is wrong. The corresponding weight deviation of the two groups of heavy hammers is too large, the bearing is damaged or the spindle is bent, and the foot is connected to the screw. According to the specific reason, step by step.
4, there is a sound inside the crusher: the part of the crusher is damaged, fall off or hard, such as stone and iron into the machine, that is, the external sound will be generated, and the machine should stop replacing damaged components or remove hard objects.
5, low production efficiency: insufficient power in electric motor, misconduct, belt slip, severe hammer wear, inefficient material is not uniform or raw material moisture contentHigh is the main reason for the low production efficiency.
We need to regularly check the machines and equipment to ensure proper work, which not only guarantees the safety of people, but also improves equipment efficiency.
ALPA Technology recommends that you must pay attention to the performance of the equipment during the use of ultrafine airflow classifiers, jet grading machines, powder classifiers, must pay attention to regular inspection equipment performance and prevent malfunctions during use.