Impact Mill Machine of Rubber Powder

Impact Mill Machine of Rubber Powder is a very practical and convenient industrial crushing equipment, most chemical industries, polymer materials need to be used, the AlPa crusher is fine, and the particles are delicate, affordable.

Impact Mill Machine of Rubber Powder uses high intelligent control system, easy to operate, easy to adjust, long service life, and the main immersion parts affecting system equipment life is a pulverizer. If wear is seriously replaced, Will affect the precision of the equipment.

ALPA Chemical Pigment Impact Mill Machine of Rubber Powder Case Sharing: The company is a company specializing in research and development, production, sales in high performance organic pigments. During its production process, the pigment ultrafine pulverization equipment needs to be used. . The company's ultrafine crushing equipment is from our AlPa, which uses our company's Impact Mill Machine of Rubber Powder.
Technical parameters:
finished particle size: 10-45μm
Production capacity: 300kg

Do you know how to correctly use the Impact Mill Machine of Rubber Powder? I hope the content below can help you.
1. Preparation before the pulverizer is started to check whether the host, joint, pipeline, and the valve are normal and working properly.
2, open the pulverizer

(1) Open the compressor power supply, dustpress pressure valve and the main air valve, open the power switch of the pulverizer, turn on the power switch.

(2) From zero, gradually adjust to the specified speed.

(3) Open the fan, cyclone separator, dust removal and charger power, open the total power box, set the frequency of the inverter, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, pulverizer shutdown sequence is: inverter - feeder - main valve compressor - Compressive plane impeller motor - cyclone material, dust removal switch - fan - General power supply air compressor.
4, eddy current pulverizer maintenance and maintenance

(1) Periodically lubricate the eddy current pulverizer, but the lubricating oil should not be too large to prevent too high of the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After a period of filter bag, it should be clearWash or replace.
5, eddy current pulverizer precautions

(1) When the device is running, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller should not exceed the specified requirements, otherwise the temperature is too high, the impeller and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.
Shan Dong Alpa is a scientific and technological private enterprise producing various airflow pulverities, airflow mills, disc gap pulverities, disc air crushers.