Turbo Grinder of Calcium Hydrate

We all know that Turbo Grinder of Calcium Hydrate is a very strong airflow crushing equipment. Many stubborn hard materials will be cut into a uniform block of a unit,

Turbo Grinder What is the design structure of any Calcium Hydrate?

Under the action of the high-speed rotary impeller, the gas pressure flowing through the impeller increases, and the high pressure airflow flows out of the impeller, the fine particles are ejected. Since the blade of the rotary vane is designed as a bending, the inlet is large, the exit cross-sectional area is small, so the airflow pressure at the outlet is reduced, the speed increases, and the rotational flow is conducive to classification.
The grading point adjustment mechanism sets three adjustment rods and keeps its synchronous motion using the chain. When the adjustment rod moves up, the fine powder increases; when the adjustment rod moves down, the fine powder is reduced. The graded point can be continuously adjusted, and the granularity of the Turbo Grinder of Calcium Hydrate can be adjusted. The granular weight of the grading weight can reach D97 ≤ 3 ≤ 150 microns, which is suitable for fine grading of dry micrometer products.
The setting of the control ring is to ensure that the control ring is formed between the control ring and the radial particles ring, and the stability of the airflow flow is controlled. The residual windlet inevitably introduces excess gas from the dry material, the temperature of the classification chamber is high, and the air can expand, and therefore designed a residual tightening to maintain the stability and balance of the graded indoor airflow.


AlPa White Carbon Black Turbo Grinder of Calcium Hydrate Share: The company is a company engaged in white carbon black production. A ultra-fine pulverization apparatus for producing two granular white carbon products can be generated in the production process. After investigation, we finally purchased our Alpa's Turbo Grinder of Calcium Hydrate.
Technical parameters:

Production capacity: 30kg


Ultra-micro grinder of Calcium Hydrate operating procedures
1, boot Check if the lubrication is oil.

3, the hand must not reach into the feed port, and the cover must not be opened in the operation.
4, the screen aperture should be appropriately selected, and the damage is required.
5. It is strictly forbidden to start the load, the machine is running a minute and then feeds, and the appropriate amount of water is marked.
6, the air is idling in front of 2 minutes to turn off the machine.


ALPA technology research and development crushing equipment has been applied in many practical engineering cases, providing basic information for objective understanding of jet grading technology.