Turbo Crusher Of Nickel Powder

Turbo Crusher Of Nickel Powder as a clean, efficient, high-level, high-yield of advanced crusher model in the pulverization of Western medicine raw materials, is very extensive, and tested from the micro-test test of dozens of grams. At the time of hundreds of tons of large production, gas flow milling with narrow particle size distribution, average particle size; good powder shape, high product purity; suitable for low melting point, thermistory drug; good sealable, low pollution; Easy to operate; crushing-mixed-dry online operations, etc. have been widely recognized by the company.

A Turbo Crusher's cost is very high. If you want to use Turbo Crusher of Nickel Powder for a long time, please pay attention to the following:

During the production process, Temperature rises in the bearing frequently, when the temperature rise exceeds 50 ° C, the examination should be stopped, find out the cause, and troubleshoot.
2. When the new machine is running, the transmission belt is easy to eliminate, so it should be noted to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Test and timely replacement of vulnerable parts should be performed in time to ensure quality and production.
4. The wear of the blade and bushing should be continuously checked. If the productivity is lowered, the particle size is thick after wear, and the wear is immediately replaced.
5.Turbo Crusher Of Nickel Powder's host and level score bearing uses special grease (265-295 degrees) lubrication.
6. The replacement period of the bearing is 2000 hours, and the amount of oil filling of the bearing chamber gap is 1 ≤ 2 (try) or 3 ≤ 4 (try), if it is not too much, the bearing temperature Will be too high.
7. The replacement period of the spiral feeder is 4,000 hours, and ordinary calcium based grease is added. Standard operation to exchange for longer use of airflow crushers.

The above is a seven-point introduction to the daily maintenance of Turbo Crusher of Nickel Powder.


ALPA Square Stone Turbo Crusher Of Nickel Powder Case Sharing: In 2020, our company successfully exported to a Turbo Crusher of Nickel Powder.
Technical parameters
Finished product fineness: D50: 3μm
Production capacity: 2-20kg / h

Turbo Crusher of Nickel Powder has been exchanged into an industrial manufacturing field. It is an essential device. As a common production equipment, it is not only advantageous, sometimes Turbo Crusher's Nickel Powder is also damaged. Let's take a look at how to check the repair equipment.

Daily maintenance Turbo Crusher's Nickel Powder To check the power outlet, plug, the power cord has no oxygen offset, the break, if you do not have the power test machine, when the motor is powered, light When the header is rotatable, it can be determined whether there is a capacity failure in the two start capacitances of the machine. If you can make a discharge spark and a very frightening, the capacitor can be used; if the sparks and sound are weak, the capacity of the capacitance has decreased, and the new or add a small capacitor. The airflow pulverizer does not use this method if the capacitor has damaged the short circuit, and it must be replaced with the same size new product.

The Turbo Crusher of Nickel Powder manufacturers have knowledge of daily maintenance and maintenance of products.
Welcome everyone to visit Shandong AlPa website, company specializing in the production and development and service of Turbo Crusher of Nickel Powder product technology, high-energy technical experts, professional after-sales service team, solved the worries of customers.