Rotor Crusher of Oxide

Rotor Crusher Oxide as a clean, efficient, high-level, high-yield of advanced crusher models in crushing, is very extensive, from dozens of minor tests from dozens of minor tests, A few tons of large production, Rotor Crusher of Oxide, with a narrow range of particle size distribution, fine particle size; good powder, high product purity; suitable for low melting point, thermal drugs; good sealable, low pollution; Crushing - Mix - Dry Online Operation and other major characteristics have been widely recognized by the company.

Typical materials are: pigments, resins, sulfur, sulfide sulfide, pesticides, epoxy resins, polytetrafluoroethylene, rubber, and phosphate.
Typical products include soybean, pollen, hawthorn, sodium chloride, Cordyceps, mushrooms, pearl powder, gastric medicine, Nimodi, antibiotics, ginseng, angiographic drugs, Ganoderma lucidum, five times, He Shouwu et al .
Typical products are: garnet, silica, diamond, silicon carbide, white carbon black, diamond, aluminum soil, boron oxide, tungsten carbide, special ceramics, etc.


AlPa Cassava Starch Rotor Crusher Oxide Case Sharing: This customer is a new panel industry company, dedicated to providing professional and excellent plywood new fillers for plywood industry customers. The company needs to be used in the production process of the company. Multi-party examine, finally purchased the CSM1100-V mechanical grinder from our AlPa.
Technical parameters:
Finished particle size: 98% over 325 mesh
Production capacity: 2T

We need to take some measures to be taken again in order to use long-term \"health\" It is protected.
1. First, the gap of the hammer screen can be adjusted: the friction on the screen changes varies from the distance between the material and the screen, and the friction is different. Improve the hammer speed and hammer material efficiency by adjusting the hammer net gap. However, during the production process, the screens they use are different, the raw materials are different, the hammer screening gap needs to be adjusted; in the crusher, the crusher is not very good at the beginning, but after a period of time Work, the particles inside the crusher also changes;In the grinding machine parts, the hammer head is easily worn, and the gap between the hammer head and the screen is increased, and the yield is also declining, it is difficult to maintain.
Of course, in order to test the yield of a crusher, for some of the raw materials, for some screen holes, in order to determine the appropriate hammer sieve gap and suction, the useful life of the screen and the hammer can be obtained in a short time. Very high grinding efficiency data. However, in the production of feed grinding, such specific measurement data, according to the operator's work experience, the technical content of the crusher itself is two things. People with enrichment of experience and labor experience also require higher operating costs. When the hammer is worn, the gap between the hammer and the sieve increases, the friction is reduced, and the abrasive efficiency is lowered.
2. Rotor Crusher Oxide mainly requires a reasonable use of reverse glitch: mainly to rush the side hair of the screen into the inside, greatly increasing friction, but this method is not used for a long time. After the globi polishing, the efficiency is lowered. It lasts for 30 minutes to 1 hour.

For any of the equipment, everyday maintenance can be performed, to ensure that the equipment can run for a long time, so daily is critical to the maintenance of Rotor Crusher Oxide.


The Rotor Crusher Oxide produced by our company can not only distribute 20-2μm from the ordinary powder, but also directly with mechanical crushing equipment, form a closed circuit, improve the pulverization. Efficiency, and can prevent high temperature in the cavity to cause adhesion, glue, glue, causing operations, and at the same time, the classifier has also received a wide range of users, and friends needed to contact us!