Cell Mills of Alumina Powder

Cell Mills Of Alumina Powder is a very convenient device that can be used to crush all kinds of products, especially some fine particle products.

Cell Mills of Alumina Powder is easy to operate Easy to maintain, with high grinding speed in the same product. At the same time, low energy consumption is the lowest in similar products. Products having the same particle size do not have functional, flammability, explosive, and oxidative materials that have particulate formation and particle dispersion, and oxidative materials can be used as a medium to achieve a closed pulverization and inertia. The loss of use of sex gas circulation is low. Negative pressure production can effectively reduce dust pollution, improve the working environment, compact structure, and seamless welding technology internally, which is easy to mechanically maintain and mechanically cleaning.

Since the high pressure gas is ejected from the nozzle, the gas stream causes the animal material to collide, shear, and friction, thereby achieving the crushing effect. Since the gas and the high speed of the animal material have a large centrifugal force. Under the effort of galvance, the crude particles were sent to the crushing room for multiple comminution, and the fine powder was discharged from the center exit.

ALPA Raw Powder Cell Mills of Alumina Powder Case Sharing:
A mechanical equipment company, the company mainly produces pharmaceutical equipment and powder automation equipment, and acts in the United States and Germany import equipment, the company has The advantages of technology and the team's cohesiveness have achieved rapid development and breaks the monopoly of foreign equipment in the industry.
Case parameters:
Product particle size: D90: 2-80μm
Hour Yield: 50-80kg

Cell Mills of Alumina Powder Job Safety Application Basic Requirements
1, Crusher Work When the operator should stand in the tangent direction of the hammer rotation, it is not allowed to wear a glove to feed, and the hand must exceed the safety line, and it is not allowed to use the iron and sticks instead of hand.
2, pulverizer and power unit should be installed firmly. If the equipment is fixed for a long time, it should be fixed on the cement; if the device is a mobile operation, the unit should be installed on the base made of angle iron, and ensure that the belt wheel groove of the power machine (diesel or electric motor) and the equipment is in the same Rotary plane.
At the same time, check if the leather belt looseness is appropriate.
4 Whether the power machine and the pulverizing machine are lubricated.
5, don't just replace the pulley, prevent the transition chamber to produce explosion, or the speed of the pulverizer is too low.
6, smashAfter the start of the machine, it should be idled by 2 to 3 minutes, no abnormal phenomenon, then press the work.
7. At any time, pay attention to the operation of the equipment, the feeding should be uniform, to prevent blocking bullies, do not have a long time overload.If there is found that vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately, and the fault can be eliminated.
8. When blocking occurs, it should be stopped immediately. It is strictly forbidden to use a wooden stick or hand to feed or pull out the feed to avoid the pulverizer to wound the arm or damage the machine.
9. If you crush a hard raw material, the operator must wear glasses.
10, the workplace should have a ventilator and strictly prohibit fireworks to prevent dust explosion from fire.