Impact Mill for Wheat Husk

It is well known that this product technology in Impact Mill for Wheat Husk has been widely valued by the industry.

With the increasing social needs, the performance, product quality and other aspects of the Impact Mill for Wheat Husk are facing huge challenges. Therefore, ALPA Technology Co., Ltd. persisted, continuously improved the ultrafine pulverization strength, particle size distribution, particle crystal form, etc. to achieve more production.
ALPA, strive to achieve low energy consumption, high yield, non-pollution in ultrafine pulverizer, to achieve good particle size, dispersion, unique and potential performance, improve powder crusher competitiveness, and realize the environment Protection and low power performance.

Technical parameters:
Finished product granularity: D99.9: 180 mesh
Production capacity: 400kg

1, super micro The crusher and power unit should be installed firmly. If the ultrafine pulverizer is fixed, it should be fixed on the cement; if the pulverizer is a mobile operation, the unit should be installed on the base made of angle iron, and ensure the power machine (diesel or electric motor) and the pulverizer The belt wheel groove is in the same turning plane.
2, after the pulverizer is installed, check the fastening of the fasteners of each part, if there is loose to tighten. At the same time, check if the leather belt looseness is appropriate.
3 Whether the power machine and the pulverizing machine are lubricated.
4, do not casually replace the pulley to prevent the transition chamber to produce explosion, or the speed is too low to affect the work efficiency of the pulverizer.
5
6. At any time, you should pay attention to the operation of the pulverizer, and the feed should be evenly charged to prevent blocking, do not have a long time overload. If there is found that vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately, and the fault can be eliminated.