Rotor Crusher of Carbon Nanotubes

In many crushing methods, Rotor Crusher of Carbon Nanotubes has become one of the most mainstream pulverization techniques with a small particle size, a narrow particle size distribution, high purity, high particulate activity, and good dispersibility. In particular Applicable materials such as crushing drugs such as contaminated materials.

Rotor Crusher of Carbon Nanotubes operate in compressed air, gas or high pressure overheating steam. Rotor Crusher of Carbon Nanotubes do not have active components, thus eliminating contamination caused by contact with external grinding media. It is also an ideal process for grinding thermal and waxy materials because wear heat is not produced. Rotor Crusher of Carbon Nanotubes is used for fluid energy. Micronization and grading are carried out in a shallow cylindrical chamber. The high pressure air or steam is injected into the chamber by a specially designed nozzle placed on a peripheral wall.

AlPA lysis Carbon Black Rotor Crusher Of Carbon Nanotubes Share: The company is a renewable energy application company in Inner Mongolia, when the company recovers the waste tire, it is necessary to use ultrafine pulverized equipment to lysis Carbon black performs ultrafine pulverization. After many incidents, our Alpa's Rotor Crusher of Carbon Nanotubes was selected.

Technical parameters:
finished particle size: D90: 500 mesh
Production capacity: 2T

The operation process of Rotor Crusher of Carbon Nanotubes is important, you need to pay attention to the following points :

1, check all the lines, electrical components, etc. of the pulverizer, whether it can work properly. Whether the machine is grounded, so that the housing is powered by electric shock. Whether the machine spindle has a card death, if it should be handled in time. Whether the machine has an abnormal situation during operation, if there is a stop check.

2, check the blade, is tightened, whether the blade gap can reach the specified standard. Before using the pulverizer, check the working room is enough or slidable, if it should be removed in time.
3, after the offset is running, it can begin to start the feed. The pulverizer should stop the feed before stopping. Wait until the machine is completely discharged, it can be stopped.
4, the feed should be uniform, not over, so as not to increase the burden on the machine. The pulverizer cannot be cleaned, maintenance, etc. during operation.

Shan Dong Alpa is committed to the development, production and sales of ultrafine powder and grading equipment.Customized according to demand, the equipment model is complete, the quality is reliable, the efficiency is high, low energy consumption, easy to operate, reasonable price, 24 hours, please consult!