Vibration Mill of Meerschaum

Vibration Mill of Meerschaum as a clean, efficient, high-level, high-yield of advanced crusher models in crushing, is very extensive, from dozens of minor tests from a few hundred of minor tests With a few tons of large production, Vibration Mill of Meerschaum is narrow, the particle size distribution is narrow, the average particle size is fine; the powder is good, the product is purity; suitable for low melting point, thermal drugs; good sealable, less pollution; Crushing - Mix - Dry Online Operation and other major characteristics have been widely recognized by the company.

A Industrial Company's main business scope is: new energy storage materials, electronic ceramic materials technology and industries, secondary resource re-production new technology and industries, biology Engineering and organic polymer materials, electronic products and network products technology development, technology transfer, technical training; products and related materials and equipment after manufacture, sales development; international technical cooperation and related field trade, technical personnel training; business companies Export business of self-produced products and technologies and import and export business of mechanical equipment, spare parts, raw materials and technologies required for this company.
Case parameters:
Product particle size: D50: 5.8μm
Hours Yield: 800kg

1, when crusher homework, operator It should stand in the direction of the hammer rotation, and if you don't wear your gloves, your hand must exceed the safety line, not allowed to use the iron and sticks instead of his feeding.
2, pulverizer and power unit should be installed firmly. If the equipment is fixed for a long time, it should be fixed on the cement; if the device is a mobile operation, the unit should be installed on the base made of angle iron, and ensure that the belt wheel groove of the power machine (diesel or electric motor) and the equipment is in the same Rotary plane.
At the same time, check if the leather belt looseness is appropriate.
4Whether the power machine and the pulverizing machine are lubricated with the direction of the machine arrow.
5, don't just replace the pulley, prevent the transition chamber to produce explosion, or the speed of the pulverizer is too low.
6. After the pulverizer starts, it should be idled by 2 to 3 minutes, no abnormal phenomenon, then press the work.
7. At any time, pay attention to the operation of the equipment, the feeding should be uniform, to prevent blocking bullies, do not have a long time overload. If there is found that vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately, and the fault can be eliminated.
8. When blocking occurs, it should be stopped immediately. It is strictly forbidden to use a wooden stick or hand to feed or pull out the feed to avoid the pulverizer to wound the arm or damage the machine.
9. If you crush a hard raw material, the operator must wear glasses.
10, the workplace should have a ventilator and strictly prohibit fireworks to prevent dust explosion from fire.

Different models of the model of the model, different granularity, different granularity, different production efficiency, different production environment, the price of processing equipment is also different, customers can consult the ALPA engineer according to their own situation Buy appropriate models and specifications, welcome to inquire.