Turbo Crusher for Agricultural Chemistry

Everyone knows that choosing a product or service, to understand from all aspects of the milling machine, service, quality, etc.

How do I solve if the dust is too big?

1. Install the dust collector: Generally, this dust collector can now be used with a crusher. It puts dust income trapping bag, dust is filtered by the dust box;

2, cloth bag dustproof: cloth bag is tightly pulled with machine, prevent leakage drain. Attention should be paid attention to parking, and the dust should be cleaned in time.
3, woodllar or pool dust removal: mainly using the ventilator to vacuum to the crushing, then vacuum, or vacuum through the pool.

The above three dust removal methods can achieve a good dust removal effect, and can solve the problem of excessive dust, which is generally installed before working to prevent excessive dust.



ALPA Quartz Sand Turbo Crusher For Agricultural Chemistry case Share: This customer needs to be air-graded in quartz sand, compared to a number of powder equipment manufacturers, and finally pass the experiment, finally choose Our AlPA classifier equipment. Product particle size: D95: 45μm hour Yield: 8-12T Welcomes major quartz sand manufacturers to visit, incompetent experiments.

1. Preparation before departure. Check if the host, connector, pipeline, and the valve are normal, working properly.

(1) Open the compressor power supply, the dust collector pressure valve and the main air valve, open the air pulverizer power switch, and turn on the power switch.

(2) From zero, gradually adjust to the specified speed.

(3) Open the fan, cyclone separator, dust collector, charge motor, open the total power box, set the inverter frequency, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, the order of the downtime:

inverter - feeder - main air valve - compressor - stage impeller - motor cyclone material, dust removal switch - windFan - Main Power - Air Compressor.
4, Maintenance

(1) The motor should be lubricated regularly, but the lubricating oil should not excessively avoid the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag, it should be cleaned or replaced.
5. Precautions

(1) When the discharge equipment is run, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.
ALPA is a manufacturer dedicated to powder grading machine, precision classifier, laboratory grade machine, and we have many years of production experience in the production of products, while we are in many mechanical products.It also achieved a lot of important breakthroughs, I believe it will be the primary choice for your product purchase.