Hammer Grinder of Bamboo Powder

Hammer Grinder of Bamboo Powder is well balanced, only needs to be produced in a smooth ground place, low noise, can avoid dust leakage during the pulverization process, which is favored by the powder industry.

Although China's crusher manufacturers are numerous, the overall R&D capability is weak, low product technology, and does not meet the application needs of high-end powder metallurgical equipment in the downstream field, and severely constrain China's crushing equipment development, with domestic manufacturers R&D The continuous investment and technology breakthroughs, domestic crushing equipment is expected to occupy greater share in the global market.

Case parameters:
Product particle size: D97: 5-75μm
hour yield: 200-500kg

123] Hammer Grinder of Bamboo Powder has been exchanged into an essential equipment in the field of industrial manufacturing. It is not only the advantage as a common production equipment, and sometimes Hammer Grinder of Bamboo Powder is damaged. To see how to check the repair equipment.

Daily Maintenance Hammer Grinder of Bamboo Powder To check the power outlet, plug, the power cord is no oxygen offset, the break, if you do not have a power test machine, when the motor is powered, light When the header is rotatable, it can be determined whether there is a capacity failure in the two start capacitances of the machine. If you can make a discharge spark and a very frightening, the capacitor can be used; if the sparks and sound are weak, the capacity of the capacitance has decreased, and the new or add a small capacitor. The airflow pulverizer does not use this method if the capacitor has damaged the short circuit, and it must be replaced with the same size new product.

In addition to Hammer Grinder of Bamboo Powder, there is also a rod grinding high-speed pulverizer. This crusher is very good, and the daily maintenance is more important. The following is this type of airflow pulverizer. Maintenance focus. Check if the lubrication of the bearing is good to check if all fasteners are tight. Check if the drive belt is installed correctly and the situation is good. Check if the protective device is good. If the protective device is found, it should be excluded in time. Check that there is no material or other debris in the damage chamber, if it is sometimes cleaned. Check if the hydraulic starting machine head or the starting roof rod is returned, the adjustment space is installed correctly and compact.

The above is the knowledge of the daily maintenance and maintenance of the Hammer Grinder of Bamboo Powder manufacturers.
Shandong Alpa is a 20-year experience manufacturing company with Hammer Grinder of Bamboo Powder equipment, with a number of patents, welcome to inquire!