Cell Mill for MICA Powder

In many crushing methods, Cell Mill for MICA Powder has become one of the most mainstream pulverization techniques with a small particle size, narrow particle size, high purity, high particulate activity, and good dispersibility. In particular Applicable materials such as crushing drugs such as contaminated materials.

First, the pulverized particle size is small, the distribution is uniform. Because the power distribution on the Cell Mill for MICA Powder material is quite uniform. The ultrafine pulverizer is an apparatus for ultrafine pulverization of dry materials by using air separation, high pressure comminution, shear and other techniques. It consists of a cylindrical crushed chamber, a grinding wheel, a wear rail, a fan, a material collection system, etc. The setting of the grading system not only strictly limits large particles, but also avoids the occurrence of pulverization, thereby obtaining a uniform powder having a uniform particle size distribution. At the same time, the specific surface area of \u200b\u200bfine powder increases, and the amount of adsorption and solubility are also increased accordingly.
Second, reduce pollution, more environmentally friendly: ultrafine pulverization is carried out in a closed system, which avoids the pollution of fine powder to the surrounding environment, and prevents dust pollution products in the air. Therefore, Cell Mill for MICA Powder applies the technology to food and health care products, which can effectively control the specific gravity of microorganisms and dust. The ultrafine pulverization speed is high and can be pulverized at low temperatures. Ultra-fine pulverization technology is smashed with ultrasonic air flow, cold grinding and other methods, which are completely different from the conventional pure mechanical pulverization method. After the gas fine particles are broken to the high-speed cyclone separator, the high-speed cyclone separator is broken, and the high-speed cyclone separator enters the coarse-grain separator, and then enters the coarse grain separation zone via the high-speed cyclone separator, and then enters the coarse grain separation area through high speed. Centrifugal separator.
Third, during the grinding process, there will be no local overheating phenomenon, and can even be smash at low temperatures, fast speed, and can be completed instantly.
Therefore, the bioactive ingredients in the powder can be minimized to produce the desired high quality products.



AlPa calcium carbonate was shared by Cell Mill for MICA Powder: The customer is a stone powder company, mainly engaged in production and processing of calcium carbonate, magnesium oxide and other companies, the company needs The calcium carbonate ultrafine powder is classified, and the product of the required particle size section is classified. After the experiment, as well as the production requirements, our AlPA's host can reach the company's needs, and finally purchased a plurality of graded units of our company.
Welcomes the major calcium carbonate flour manufacturers with powder grading to factory to visit and incurred.
Ultrafew Cell Mill for MICA Powder is emptyGas separation, heavy polishing, shear forms to realize the ultra-fine pulverized equipment for dry materials, and are widely used in various industries. Let's take a brief introduction to its daily maintenance content.
1, when the bearing oil is high, it is necessary to stop checking the cause of the fault and removal immediately.

3, for the top surface of the chassis of the active device, it is necessary to remove dust and other debris avoiding the machine that cannot be broken, the active bearing cannot move on the chassis, causing an accident.
4, all loads of the machine are bearings, so good lubrication and bearings have a large relationship, it can directly affect the service life of the machine and the operating rate, so the amount of lubricating oil required to be injected should be reached. Good seal.

6. Note that the operation of each part of the machine is normal.
7. If the rotating gear is in operation, if there is a hitting sound, it should be stopped in time and remove the fault.


The company provides free experiments and testing, and provides 24-hour consultation services, welcome to use.