Turbo Mills of Color Mixing

Turbo Mills of Color Mixing can be used for important or need to be grounded to granular product processing, the ALPA ultrafine pulverizer product is good, affordable, factory direct sales, also push after-sales maintenance service for customers, service attitude

1. Turbo Mills of Color Mixing The operation rules are as follows: Prepare materials after the preparation before the start is prepared. Complete the site to clean the grocery. Check whether the transportation pipes and auxiliary equipment, whether the pipelines are blocked, leak or poor sealing, whether the auxiliary equipment is intact, whether it works normally. Whether there is a phenomenon that the material is accumulated in the outer casing and the separator, if the accumulated material is required. Whether the bearing is lubricated, whether it is lubricated in an appropriate place. Check if all pipes, fastening bolts, washers, spindles, and instruments are intact, normal and flexible.
Second, Turbo Mills Of Color Mixing starts the motor, control the current and time at starting, so that the device can start running. When the equipment is operating normally, the feed speed can be adjusted according to the properties of the material. Uniform continuous feed should not be large or small, thereby affecting the separation effect of the grinding machine, making the machine easily malfunction. During operation, if an abnormality occurs, stop checking immediately before the failure continues.
Third, the main procedures of Turbo Mills of Color Mixing are as follows: After the material in the grinding machine housing is completely pulverized, it should stop the feed and turn off the motor. After the machine is idling for 3 minutes, press the stop button to stop the machine. When the machine is completely stopped, open the check door and check the wear of the vessel. Fill in the corresponding production record, update the device status flag, which is convenient for the next use.


ALPA Battery Powder Turbo Mills of Color Mixing Case Sharing:
A Industrial Company's main business scope is: new energy storage materials, electronic ceramic materials technology and industries, secondary resources Regeneration New Technology and Industry, Biological Engineering and Organic Polymer Materials, Electronic Products and Network Products Technical Development, Technical Transfer, Technical Training, Products and Related Materials and Equipment after Manufacturing, Sales and Development; International Technical Cooperation and Trade, Technical talent training; business of import and export business of mechanical equipment, spare parts, raw ciliary materials and technologies required to operate the company's self-produced products and technologies and the import and export business of mechanical equipment, spare parts, original auxiliary materials and technology.
Case parameters:
Product particle size: D50: 5.8μm

Influence Turbo MiLLS of Color Mixing Equipment Running Efficiency The following points:
1. Material properties, in general, air pulverization equipment can adapt to all brittle materials, but due to the different material properties, the comminuted performance is also different. Due to the difference in strength, density, hardness, viscosity, shape and electrical properties of different materials, the difference in pulverization effect is inevitably, and the strength of the material is an important factor. The water content of certain materials will change the performance, toughness of the crushing material. The increase in viscosity also produces noise on the fineness of the pulverized material.
2. If the processing capacity of the device is the same, if the processing material is different, the grinding fineness will be different. In general, the processing capacity of the airflow grinding machine is proportional to the particle size of the product.
3. The influence of back pressure refers to the average pressure of the pulverized indoor gas, and the increase in back pressure is not conducive to the crushing process, affecting the efficiency of gas flow grinding equipment.

Different models of the model of the model, different granularity, different granularity, different production efficiency, different production environment, the price of processing equipment is also different, customers can consult the ALPA engineer according to their own situation Buy appropriate models and specifications, welcome to inquire.