Hammer Mills of Seaweed

With the continuous development of pulverizer technology, Hammer Mills of Seaweed has gradually penetrated into everyday life.

When titanium powder is pulverized by superheated steam, the vapor pressure is usually 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after pulverized surface can be lower.

ALPA Hammer Mills of Seaweed Case Sharing: The company is a professional manufacturer of active biological extracts. It needs a super-smashing machine that meets GMP requirements, and examines a number of powder equipment manufacturers, and finally purchased. Our alpa's Hammer Mills of Seaweed.

Finished product granularity: 100 full pass
Production capacity: 120kg


Let me introduce the Hammer Mills of Seaweed operation method.

2. The spindle direction must be consistent with the direction of arrow on the shroud, otherwise it may damage the machine and cause personal injury.
3. Check if the crusher is complete.
4. Check if the gas flow pulverizer has a hard object such as metal in a crushing room, otherwise it will damage the tool, affect the machine.
5. You must check the purity of the material before crushing. Metal hard materials are not allowed to avoid damage to the tool or cause combustion.
6. The oil cup on the machine should always note the full lubricant to ensure that the machine is operating normally.
7. Stopping before stopping. If you do not continue, remove the residers from the machine.
8. Regular inspection tools and screens are damaged. If damage is damaged, it should be replaced immediately.
9. There will be slight vibration when using the fuselage. Be sure to tighten the cover to connect the handle to avoid accidents.
ALPA is a professional powder airflow mill manufacturer, complete model, quality assurance, high quality, sell well, easy to operate, powder airflow mill, welcome new and old customers to come to consult!