Pin Grinder of Stainless Steel Powder

Publish: 2021-11-30 17:38:02

Views:

At present, PIN Grinder of Stainless Steel Powder has gradually entered people's lives, more and more plants, and companies are using the equipment.

PIN Grinder of Stainless Steel Powder is a commonly used airflow pulverization method, also known as fluid energy mill for micronization of solid materials. In many cases, the micronization process is generally considered to be a black box that produces fine powder and crude particles.

Alpa Chicken Pin Grinder of Stainless Steel Powder case Share: The company is a Spanish company, the company needs to smash a chicken protein, asking all kinds of powder equipment companies in Europe, there is no suitable equipment. Later, I learned that our ALPA, the testism sent us a message, and we didn't know if it was received after receiving the email. But our ALPA still decided to try it, and then let the customer maidens will be experimentally. Through multiple experiments, we have identified a crushing equipment that meet the particle size needs of the company. Finally, the company also purchases the series of equipment.

Technical parameters:
Finished granularity: 100μm
Production capacity: 500kg

Let's talk about how to use Pin Grinder of Stainless Steel Powder

First, prepare before booting the host, attachment machine, pipeline, and valve, whether it is intact, whether it works fine.
Second, open

1. Turn on the compressor power supply, the pressure valve and the main valve of the dust collector, then turn on the power switch of the powder machine, and turn on the power.
2. From the zero start grading wheel and gradually adjust to the specified speed.
3. Several turning wind turbines, cyclone separators discharge, dust removal, feed motor power, and then turn on the total power supply of the tube bar, set the inverter frequency, and then begins to break.
4. The particle size of the finished wheel can be adjusted by grading wheel frequencies and charging.
Third, the order of shutdown is: inverter - feeder - Main valve - Compressor - Stepper wheel Motor - Cyclone discharge, dust removal switch - Fan - Total Power - Air Compressor.
4, repair

1. The motor should be lubed regularly, but the grease should not be too large, the bearing temperature is too high.
2. Hierarchical impeller, spiral feeder, crushing nozzle wear should pay attention to check, belt tight and suitable.
3. After a crushing material, after a certain period of time, it is necessary to remove the viscosity of the chalk, so as not to block, thereby affecting the crushing effect.

4. After a filter bag, you should clean or replace it.
V. Note

1. When the discharge device is running, the unloading port cannot be extended to avoid accidents.
2. The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric machine are damaged.
3. Regularly check the safety valve to ensure safety.
For more details, please pay attention to Shan Dong Alpa.

Previous: Pin Mill for Bentonite

Next: Hammer Mill for Flame Retardant