Turbo Grinder of Methyl Cellulose Ether

Publish: 2021-11-30 17:37:00

Views:

Environmentally friendly Turbo Grinder of Methyl Cellulose ether has gradually become the market leading to mechanical equipment, and the modern new mechanical equipment in the mechanical processing and manufacturing industry in the stage has gradually replaced traditional rough mechanical processing. Production has become a new leading leading to the implementation of technological innovation upgrades at this stage.

Turbo Grinder of Methyl Cellulose ether is an apparatus that uses air separation, heavy polishing and cutting to achieve dry material. It consists of a cylindrical crushed chamber, a grinding wheel, a wear rail, a fan, a material acquisition system, and the like. The material enters the cylindrical crushing chamber through the feed port and is pulverized and pulverized by a grinding wheel moving around the wear rail. The pulverized material is taken out from the crushing chamber through the negative pressure air flow caused by the fan and enter the material collection system. After filtering the filter bag, the air is discharged, collecting materials and dust, and completes broken.

ALPA Soybean Turbo Grinder of Methyl Cellulose Ether case share: The customer is a company in the Netherlands. The company needs ultrafine pulverization to soybean meal (after oily oil). Investigating European equipment manufacturers, integrating, or our ALPA equipment is better than the performance ratio, or from cost performance. Through the incoming experiment, the company chose our company's Turbo Grinder of Methyl Cellulose ether.

Turbo Grinder of Methyl Cellulose ether vibration The reason and solution can be carried out from the following aspects:

1, the hammer installation error in the maintenance assembly. When the hammer is turned off, in order to prevent the weight of the rotor from losing balance, all the hammers in the pulverizer must be turned out together, otherwise it will have a strong vibration in the operation.

2, the difference between the weight of the two sets of hammer exceeds 5 grams. The method of excluding is to adjust the weight of the hammer, so that the difference between the two sets of weight is less than 5 grams.
3, individual hammer card is too tight, there is no open in operation. After the stop, turn the observation with hand and find a way to turn the hammer flexible.
4, other parts of the rotor are unbalanced, and the adjustment balance needs to be carefully checked.
5, the spindle bending deformation. The solution is to school straight or replacement.
6, the bearing gap exceeds damage. It is generally used to solve the problem.
7. The bottom angle fixing nut is not fixed in a fixed or running. The solution is tightening.

If you have something about other crushers, you want to know, welcome to consult!

Previous: Turbo Mills for Single Crystal Ternary

Next: Hammer grinder of ceramic paint