Turbo Mill of Black Pesticide

Turbo Mill Of Black Pesticide is good, only need to be produced in a smooth ground, and low noise, which can avoid dust leakage during the pulverization process, favored by the powder industry.

Turbo Mill of Black Pesticide temperatures increase, when the temperature of the working fluid is too high, the flow rate of the gas will increase. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy.
When titanium powder is pulverized by superheated steam, the vapor pressure is usually 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after pulverized surface can be lower.

Case parameters:
Product particle size: D97: 5-75μm
Hours Yield: 200-500kg

1. Install the filter dust removal equipment. For the dust generated by the high-temperature pulverizer, foam dust removal, wetting agent dust removal, ultrasonic atomization technology, composite filter bag dust removal, folding dust release bag, wide spacing electric precipitator dust removal. The user can also consider the overall performance of dust removal, so combined dust removal is used.
2. Due to the mild leakage during the production process, the dust will appear, causing pollution to the work area. Therefore, the user needs to guarantee the sealing property of the pneumatic grinding machine.
3, increasing the humidity of the equipment operation area, strengthening ventilation, storing fire equipment, avoiding a large amount of dust inhaling the harm caused by the human body.
4. Production enterprises should be equipped with corresponding protective supplies as required for air compressor operators. The operators should also wear protective supplies in accordance with regulations.
5, do a good job in the maintenance and management of existing dust equipment, guarantee its normal operation and use dustproof. The maintenance management of high temperature crushers seems simple, and actual operation requires good attitude and habits.

ALPA also believe that future airflow crushing technology will become better and better, users who need to purchase such products can contact us.