Turbo Crusher Of Wood Fiber

Many friends who want to produce industrialized must be unfamiliar with Turbo Crusher of Wood Fiber. Turbo Crusher of Wood Fiber has the characteristics of convenient, unclear, crushing product quality, is a very useful crushing machinery. .

Turbo Crusher Of Wood Fiber has a wide range of pulverized granularity, simple and convenient, but during the pulverization process, there is often a case where the crushing effect is different.

The crushing effect is mainly affected by the following factors:

The temperature and pressure of the gas ratio, the feed particle size, the working fluid, and the pulverization aid. The gas-solid ratio of the pulverizer in crush is an important technical parameter and an important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. But if the gas is too high, not only will waste energy, but will even degrade the dispersion performance of certain pigments.

When pulverizing hard materials, there is a stricter requirement for the particle size of the feed. In terms of titanium powder, it is necessary to control 100 to 200 mesh when pulverizing calcination; the material after pulverizing surface is generally 40 to 70 mesh, and cannot exceed 2 to 5 mesh.
So, should you choose how high pressure when crushing? Those skilled, this is mainly dependent on the comminutability and fineness requirements of the material.
Alpa Quartz Powder: Non-metallic melting composite powder Turbo Crusher of Wood Fiber Case Sharing:

The company and the domestic inorganic non-metallic materials, cooperation, benefiting the ecological chain platform, serving the ecological chain platform, serving major multinational companies, listed companies and excellent domestic small and medium-sized enterprises, and continuously introducing cost-effective products, Create customer value and achieve capital appreciation.
Case parameters:
Product particle size: D100: 14μm
Horses Yield: 600kg

It is necessary to clean Turbo Crusher's Wood Fiber for a long time. Before the airflow pulverizer is cleaned, all machines should be disassembled. When cleaning, the power supply can be turned off, and the remaining dust can be removed directly with a brush. We must remember to clean it layer by layer. When the displacement is unloading, you can remove the four screws on the base, then remove the hopper. When sieved, the air pulverizer door can be opened directly, the mostAfter removing the screen.After removing the movement gear, release the fastening nut first, then separate the live teeth from the spindle.Then remove the active gear and place it safely.Remove the fixed gear, remove the screw and remove the fixed gear.Be careful when disassembling the air pulverizer and must never be damaged by machine components.