Cell Grinder for Silver Powder

Currently, Cell Grinder for Silver Powder has gradually entered people's lives, more and more plants, and companies are using the equipment.

Ultra Micro Cell Grinder for Silver Powder Application Advantage
Ultrafine Crusher is generally used in industrial and ultrafine pulverized machines have mechanical methods, physical methods and chemical methods.
In the food industry, the main method of producing food ultrafine powder is mechanical law.
According to the material stress condition and mechanical movement of the destruction process, the mechanical method can be divided into airflow failure method, media mixing and damage method and impact damage; according to the material medium, mechanical law can be divided into dry destruction. Method and wet destructive method.
Fruit and vegetable material is more complicated in destruction, and there is more dry destruction.
When there is destruction of fruits and vegetables, it should be paid to the extent of damage, the processing process is not contaminated, avoiding the loss of material nutrients in the process process. It is used to destroy her herbs, and can also be used to destroy pollen, pearl powder, can reach a very good destruction.

ALPA Baby Cell Grinder for Silver Powder case sharing: The company is a chemical enterprise, it is necessary to make ultrafish smashing of small soda, investigate a number of powder equipment enterprises, and finally chose our alpa's Cell Grinder for Silver Powder.
Technical parameters:
Finished granularity: D97: 20μm
Production capacity: 10-220kg

Check before debugging:
1 , Newly installed equipment, it is inevitable that iron blocks, welding bales, weld slag, etc. In the absence of the fan and the main motor, open the implicit baffles under the feed port, allowing impurities and washing materials to be discharged from here. After the end, open the ultrafine pulverizer observation door, check whether there is impurities in the pulverizer, hammer head and ring gear have problems.
2, before checking everything is normal, the power-on starting the device, check the direction of rotation of all motors.
3. Parameter inspection setting for the two inverters of the ultrafine pulverizer's feed motor and the graded wheel motor, check if the air open, contactor, heat relay, overcurrent relay adjustment is appropriate? Return all lines all over again.
4, check whether the solenoid valve is blown normally, regulate the dust collector solenoid pulse width and blow interval.
5. Check if the turbine dragons have slight winds, you can use your hands or fine powder.There is a feeling of suction in the interface, if you have a sealing treatment.After all of the above tests are normal, prepare the material production.