Rod Pin Mill for Titanium Dioxide

Publish: 2021-11-25 09:48:03

Views:

Modern production not only pursues production and finished product quality, but also develops toward environmental protection. Especially in the comminution industry, the overall development trend of ROD pin mill for Titanium Dioxide technology in China is to stably develop, highly controllable, high quality, etc.

Rod pin mill for Titanium Dioxide temperatures increase, when the temperature of the working fluid is too high, the flow rate of the gas will increase. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy.

When titanium powder is pulverized by superheated steam, the vapor pressure is usually 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after pulverized surface can be lower.
ALPA Pea Protein Rod Pin Mill for Titanium Dioxide case share: The customer is a food company in Russia. After looking for a lot of powder equipment companies, they did not find the right equipment. It has been influenced by the company's production and operation, and finally I saw the ultrafine pulverization of pea protein before our website. Finally, through the incoming experiment, I finally determined the Rod Pin Mill for Titanium Dioxide purchased our company.
Technical parameters:

Finished particle size: 400 mesh

Production capacity: 1.5T

Now let's talk about Rod Pin Mill for Titanium Dioxide's troubleshooting.
ROD PIN MILL for Titanium Dioxide Troubleshooting:

1, feed back irrigation: Improper tunnel adjustment, pipeline clogging, screen blocked, dust bag gas permeability or severe wear, hammer surface wear is serious Waiting, etc. will cause feedback. When this happens, you should find out the cause, then take elimination measures, or remove the valve, replace the powder bag, improve the breathability, or replace the hammer head.

2, bearing overheating: When the bearing lubrication is poor, the damage or the spindle bend, the rotor is severely imbalance, and the belt is too tight and the bearing is overheating. By replacing the lubricant, replace the bearing and spindle, balance the rotor and adjust the belt, the bearing can return to normal state.
3Connected to the screws. According to the specific reason, step by step.
4, there is a sound inside the crusher: the part of the crusher is damaged, fall off or hard, such as stone and iron into the machine, that is, the external sound will be generated, and the machine should stop replacing damaged components or remove hard objects.
5, low production efficiency: insufficient electric power power, misconduct, belt slip, severe hammer wear, raw material unevenness or high raw material moisture content is the main reason for the low production efficiency.
We need to regularly check the machines and equipment to ensure proper work, which not only guarantees the safety of people, but also improves equipment efficiency.

Shandong AlPa is a company with 20 years Rod Pin Mill For Titanium Dioxide, manufactures, after years of precipitation and accumulation, rich experience, and has multiple patents. In the past many years of rod pin mill, for so many years, there will be tens of thousands of equipment at home and abroad, often have a customer to order our products again, enough to explain the reputation of Shandong Alpa Rod Pin Mill for Titanium Dioxide. Welcome to inquire!

Previous: Rotor Crusher of Phosphors

Next: Pin Crusher for Wheat Husk