Rotor Grinder of Powder Coating

Rotor Grinder of Powder Coating can be used in the current industrial production process, and AlPA has been committed to the development and application of devices such as grading machines for many years. The classification machine has gradually begun to develop in the direction of modernization, and we believe that we can provide a complete set of production planning programs to our customers in a large range.

Rotor Grinder of Powder Coating work is also a factor affecting work efficiency. When the temperature of the working fluid is too high, the flow rate of the gas will increase. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy. When the titanium powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.

Alpa Xiashi Powder Rotor Grinder of Powder Coating Experiment: A mining company needs to be sorted by the powder, through the experiment of our ALPA can do product particle size: D90: 16.8μm, Yield: 246kg / H 加 加 量
Welcomes the majority of major manufacturers who have the level of grading of Xia Shi powder to the factory to visit, and collective experiments.

Rotor Grinder of Powder Coating Solutions
1. Ensure that the quality of the crushed machine grinding disc is not harmful: the real-time monitoring system is carried out on the friction plate that has just changed, immediately obey the grinding The tray is harmful to the intake system.
2. The grease oil does not meet the regulations: Analysis of the grease on time on time, ensuring that the grease oil exceeds the remarks.
3. The refrigeration system does not have a cooling effect: the cooling tower of the intake system is used to use a water cooler to use the continuous liquidity cooling circulating water to grease the heat production. When driving, when driving, touch the cooling tower with hand The oil pipe, the temperature difference is small, almost not, can be seen that the single cooling tower effect is not obvious, the heat exchange time of the cooling circulating water and the grease is too short, and the cooling tower is connected in series, and the cooling tower is refrigerated. Extend heat exchange time.