Rod Pin Mill for Nylon Powder

Most of the product production and processing of the current stage use Rod pin mill for Nylon Powder, the use of the product of the product is one of the very common ways of processing, accompanied by the continuous improvement of scientific productivity, grading equipment Technology is also imminent. The performance and internal configuration of the grading device of the airflow must also keep the trend of the era to continue the upgrade of the product.

There are usually two classification wheels: metal and ceramics, for some magnetic pollution-sensitive materials, the ceramic grading wheel must be used, and the current market is commonly used in the market. Another silicon nitride ceramic has excellent machining properties, high temperature resistance, corrosion resistance, wear resistance, high strength, high adhesion, low density, low friction coefficient and self-lubricity.

The grading wheel can be widely used in powder refining and grading industries. At present, the maximum diameter of φ180 mm is currently reached, the highest operating speed is 12,000 rpm, and the normal service life is more than 1 year. It has been successfully applied to Downstream users, the application is good. The maximum use of this classification wheel is to prevent metal pollution, in addition, its specific graviz is 40% lower than zirconia ceramics, which can not only greatly reduce the energy consumption of the motor, but can greatly lower motor energy consumption. Under existing motors, overcons can be achieved to obtain finer particles.

Technical parameters:
Finished granularity: D50: 10-30μm
Production capacity: 30-50kg

In the production process, Rod Pin Mill for Nylon Powder is widely used. How do you operate more secure?

2, if the superfine classifier is running, the operator does not stand in the range of rotation to avoid accidents.
3, the staff is in the work, in order to ensure their own safety, wear a well-dressed work apparel.
4, when the classifier is added, do not add hard, because the hard object will damage the machine.
5. If the classifier begins to work, the staff should not leave and prevent problems.
6. If the superfine grade machine is found, it is necessary to stop checking.
7Do not open the cover or other actions before the classifier is not fully stopped, if you want to make an operation, you need to stop completely.

The company provides free experiments and testing, and provides 24-hour consultation services, welcome to use.