Rotor Grinder for Coconut Shell

In the classification operation of the industrial production at this stage, the application of Rotor Grinder for Coconut Shell is mainly targeted for the effective crushing of solid particles, and is the case where we are more commonly used in the product ultrafine pulverization process.

The main application of Rotor Grinder for Coconut Shell determines its extensive application range and fineness of finished products.
Typical materials are: super hard diamond, silicon carbide, metal powder, etc. High purity requirements: ceramic color, medicine, biochemistry, etc., low temperature requirements: medicine, PVC. By changing the normal air of the gas source into an inert gas such as nitrogen and carbon dioxide gas, it can be used as an inert gas protection device. Suitable for crushing of flammable and explosive and oxidative materials.

Technical parameters:
Finished particle size: lithium cobaltate small particles D50: 3-6 μm; lithium cobaltate large particles: 50: 8-20 μm; Trimetimeterials D50: 6-13μm;
Production capacity: Lithium cobaltate particles: 250 kg of lithium cobalt acid lithium large particles: 500kg ternary: 500kg

In the production process, we should pay attention to maintenance and maintenance of Rotor Grinder for Coconut shell.

2, when the new machine is running, the transmission belt is easily elongated. Pay attention to adjust the appropriate tightness of the belt to ensure the life of the belt.
3, which should be regularly inspected, replace it in time to ensure quality and production.
4, the wear of the blade and lining should be checked regularly. If the productivity is lowered after the wear, the grain size is thicker and the wear is immediately replaced.
5, the host and the grading flow bearing use grease lubrication.

6, the replacement period of the bearing is 2000 hours, the amount of the grease is 1/2 or 3/4 (lower test) of the bearing cavity space cannot be filled with too much oil, otherwise the temperature of the bearing will be too high..
7, the spiral feeder changes the fat period of 4,000 hours, plus ordinary calcium based grease.
8, in the output shaft E, i.e., pulley E, avoid heavy hush, damage to the part.
9. It is strictly forbidden to turn the handle of the handwheel in the stop.
10, the lubricator used by the governor adopts N32 alkaline high-zinc high anti-milling oil, and the reducer uses 401 universal lubricants and cannot be replaced by other machines.
11. After 3000 hours, the new oil should be replaced, and then used after 500 hours of oil for the second change, then use it after 1000 hours.

The superfine grade machine produced by AlPa can be produced simultaneously for multiple particle size products.Welcome new and old customers to come to consult!