Turbo Mill for Wollastonite

Publish: 2021-11-19 08:34:53

Views:

With the continuous development of pulverizer technology, Turbo Mill for Wollastonite has gradually penetrated into daily life.

Turbo Mill for Wollaston operated in compressed air, gas or high pressure overheating steam. Turbo Mill for Wollastonite has no movable components, thus eliminating contamination caused by contact with external grinding media. It is also an ideal process for grinding thermal and waxy materials because wear heat is not produced. Turbo Mill for Wollastonite is used for fluid energy. Micronization and grading are carried out in a shallow cylindrical chamber. The high pressure air or steam is injected into the chamber by a specially designed nozzle placed on a peripheral wall.

ALPA Battery Turbo Mill for Wollastonite Case Sharing: Shandong Yantai Chemical Materials Company, who purchased a specially crushed battery material from our company in 2020. Technical parameters finished particle size: D50: 8-12μm production capacity: 50kg / h

Do you know how to use Turbo Mill for Wollastonite correctly? I hope the content below can help you.

1. Preparation before the pulverizer is started to check whether the host, joint, pipeline, and the valve are normal and working properly.
2, open the pulverizer

(1) Open the compressor power supply, dustpress pressure valve and the main air valve, open the power switch of the pulverizer, turn on the power switch.

(2) From zero, gradually adjust to the specified speed.

(3) Open the fan, cyclone separator, dust removal and charger power, open the total power box, set the frequency of the inverter, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, pulverizer shutdown sequence is: inverter - feeder - main valve compressor - Compressive plane impeller motor - cyclone material, dust removal switch - fan - General power supply air compressor.
4, eddy current pulverizer maintenance and maintenance

(1) Periodically lubricate the eddy current pulverizer, but the lubricating oil should not be too large to prevent too high of the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag is filtered, it should be cleaned or replaced.
5, eddy current pulverizerPrecautions

(1) When the discharge equipment is run, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller should not exceed the specified requirements, otherwise the temperature is too high, the impeller and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.

The equipment market is rapidly changing. At present, the airflow classifier has certain needs in the market, but the society is constantly evolving, no matter what industry needs to keep up with the times, it can lead the industry.

Previous: Vibration Mills for Dried Plum

Next: Impact Crusher for Phenol Resin