Hammer Mills for coal ASH

Everyone knows that choosing a product or service, to understand from all aspects of the milling machine, service, quality, etc.

1. Strengthen basic theoretical research, optimize process flow

Strengthen basic theory research to guide Self-innovation and development of equipment, based on existing equipment, vigorously develop process optimization research and optimize process flow. For mass-produced powders, special models can be developed.

2. Improve stand-alone production, reduce unit product energy consumption

With the increasing demand for ultrafine powder products, especially large-scale dosage users increase and product quality The continuous increase in stability requirements has continued to rise for large equipment market demand. Large-scale equipment can more effectively adapt to the development trend of ultrafine powder processing and gradually expand the scale, and there is also many advantages in the energy consumption of unit products, excellent product quality and convenient management.
3. Improve product fineness, enhance the device pulverization limit

The ultrafine powder processing equipment and technical demand for particle diameter at 1 μm or less is getting stronger. Ultrafine powder will be a very important development trend in the field of ultrafine powder in the future. This is mainly due to the current large amount of high-tech and the development and production of new materials. For example, in terms of environmentally friendly building materials, the development of biomedicine materials, etc..
4. Online regulation of product fineness and particle size distribution

This development is a prerequisite requirement for ultrafine crushing lines to achieve intelligent control. Strengthen automatic control and online testing equipment and related software developments and related software in order to improve the level of equipment and reduce energy consumption.


ALPA Sodium Hammer Mills for coal ASH case Sharing: This customer is mainly engaged in high energy chemistry, hydrogen production and hydrogen energy development, special gases, fine chemicals, environmental engineering, etc. Professional research design. The research institute requires a device that can be superfined with sodium chlorate. Find a domestic powder equipment enterprise. Finally, I bought a Hammer Mills for coal ASH in our AlPa.
Technical parameters:
Finished granularity: 100-325 mesh

In the production process, it should pay attention to maintenance and maintenance of Hammer Mills for coal ASH.
1, during the production process,Check the bearing temperature. When the temperature rises above 50 degrees Celsius, the machine should be stopped to find the cause and troubleshoot.
2, when the new machine is running, the transmission belt is easily elongated. Pay attention to adjust the appropriate tightness of the belt to ensure the life of the belt.
3, which should be regularly inspected, replace it in time to ensure quality and production.

5, the host and the hierarchical flow bearing use grease lubrication.

6, the replacement period of the bearing is 2000 hours, the amount of the grease is 1/2 or 3/4 of the bearing cavity space. (Lower test) The temperature of the bearing will be too high.
7, the spiral feeder changes the fat period of 4,000 hours, plus ordinary calcium based grease.
8, in the output shaft E, i.e., pulley E, avoid heavy hush, damage to the part.
9. It is strictly forbidden to turn the handle of the handwheel in the stop.
10, the lubricator used by the governor adopts N32 alkaline high-zinc high anti-milling oil, and the reducer uses 401 universal lubricants and cannot be replaced by other machines.
11. After 3000 hours, the new oil should be replaced, and then used after 500 hours of oil for the second change, then use it after 1000 hours.

If there is related requirements, please call us!