Cell Mill for Carbon Nanotubes

Cell Mill for Carbon Nanotubes is well balanced, only need to be produced in a smooth floor, and low noise, which can avoid dust leakage in the pulverization process, which is favored by the powder industry.

The advantage of Cell Mill for Carbon Nanotubes, a small amount of wear-resistant components made of special hard wear raw materials, small size, light weight, convenient replacement replacement. Cell Mill for Carbon Nanotubes is dried, and the material is repeatedly collided with a multi-shaped high-pressure airflow intersection. The damaged material moves with the rising airflow to the cascading area under the exhaust. The low temperature failure is composed of silo, mechanical failure, air blower, cyclone, vibrating screen, liquid nitrogen tank, etc. After the damage material is cooled and embritful, it is easy to destroy at low temperatures, and the destruction effect is achieved by repeated impact, collision, shear, and conflict between materials and materials. Cell Mill for Carbon Nanotubes processes high-speed blowers with 20m / s, which affect other high-speed sports. Due to the large gas flow, the material impact strength is high, the grinding efficiency is high, the motion of the spray gun and the large axial movement of the cyclone data are minimized, and the impulse and metal wall wear are reduced. Since the air under the crushing chamber grinds the bottom of the conical bottom, the bottom portion enters the nozzle in the crushing chamber. The cone data can also be used for high-speed airflow nozzles, eliminating damage, blind spots, and data under spherical media and crushing rooms in time. The rolling of the cylindrical sphere, the irregular effects of the media, and the stratigraphic data, and the need for double-effect grinding, so that the grinding product is very thin and the particle size is uniform.

ALPA Trimage Material Cell Mill for Carbon Nanotubes Sharing:
A lithium-electric material company main product is \"lithium-electrode material\", the most important component of the lithium ion battery includes an electrolyte, isolation material, a positive electrode Materials, negative electrode materials, housing, etc. High-end lithium battery sector requirements for sexy life life.
Case parameters:
Product particle size: D50: 9.1μm
Hour Yield: 300kg

How to maintain ultra-fine Cell Mill for Carbon Nanotubes, introduce the following points to you:
1. The pulverizer runs around each week, it is necessary to stop, check if the filter dust is blocked, and clean the filter dusting film.
2, the bearing is marked, and the high temperature butter is added regularly, and the bearing is lubricated and maintained.
3, before production, air machine operation, checkThere is no abnormal noise under the equipment, every two months, and there is no looseness.
4, before each shift is parked, the air machine is loaded, and all the materials of the cavity are all discharged.

The Cell Mill for Carbon Nanotubes produced by our company can not only distribute 20-2μm from the ordinary powder, but also directly with mechanical crushing equipment, forming a closed circuit, improvedCrushing efficiency, and can prevent high temperatures in the cavity to cause adhesion, glue, glue, causing operations that cannot be carried out, and at the same time, the grade machine has also received a good review, and the friends who need it are in contact with us!